inverse analysis - Globe Thesis

Keyword [inverse analysis] Result: 1 - 20 \| Page: 1 of 2
1.	Studies On The Dynamic Mechanical Properties And Energy Absorption Of Aluminum Alloy Foams
2.	Modeling Research On Microstructure Simulation During Hot Plastic Forming Based On Flow Curve
3.	Inverse Calculation Of Interfacial Heat Transfer Coefficient During Casting Solidification And The LDPC Process Optimization For Thin-walled Casting Of Aluminum Alloy
4.	Study On The Simulation Of Multi-wire Submerged Arc Welding Heat Source Model And Appearance Of Weld
5.	The Experimental Investigation On Dynamic Properties Of The Metallic Porous Materials
6.	Study On Tunnel Section Design Based On The ANSYS Optimization
7.	Study On In-situ Stress Distribution Law And Its Application In Pingdingshan Mining Area
8.	Research On The Accurate Prediction Method Of3D Trimming Line
9.	Identification Of Material Microscale Prdperties And Damage Model Parameters By Inverse Analysis
10.	Determination Of Metal-mold Heat Transfer Coefficient During Casting Solidification For Aluminum Alloys
11.	Contact Mechauical Properties Of Diffusion And Deposition Duplex Modified Layer On Metal Surface
12.	The Inverse Analysis Of Interface Heat Transfer Coefficient At The Metal/Mold In Water-cooled Mould Casting
13.	Theoretical And Numerical Investigation On Warm Formability Of AA5086 Sheets And Its Experimental Verification
14.	Experimental Study On The Interfacial Heat Transfer Coefficient Between Roll Surface And Molten Pool And The Verification Of The Result
15.	Research On The Algorithms Of Blank Unfolding And Spring-back Simulation For Sheet Metal Parts
16.	Study On Monitoring Technique For Deepwater Drilling Riser
17.	Study On The Anisotropy Of Medium-thick Plate Metal Used For Fine Blanking
18.	Investigations On High-precision Methods To Measure Welding Deformation
19.	Inverse Analysis Of Elastic-plastic Constitutive Parameters Of Aluminum Alloy Laser Weldment Based On Digital Image Correlation
20.	Inverse Identification And Simulation Application Of The Interfacial Heat Transfer Coefficient During Quenching Processes Of Aluminum Alloy
<<First <Prev Next> Last>> Jump to