metal strip - Globe Thesis

Keyword [metal strip] Result: 1 - 20 \| Page: 1 of 2
1.	Study On Process Parameter For The Tension Leveling Of Metal Strip With The Finite Element Method
2.	The Study Of Metal Strip Confined By C2S2
3.	Study On Aided-Design Of The Tension Leveling Of Metal Strip And Its Control Simulation
4.	Study On Deformation Behavior Of Metal Strip And Its Microstructural Evolution During Shear-rolling Process
5.	Research On Metal Strip Winding Shaft Radial Pressure And Coiling Process
6.	Studying And Designing On Automatic Control System Of Short Metal Strip Fineblanking Based On PLC
7.	Metal Strip Disc Blade Slitting Fracture Analysis And Slitting Process Numerical Simulation
8.	Study On Rolling Force Model For High Strength And Low Elastic Modulus Of The Metal Plate
9.	Development Of High Precision Metal Strip Descaling Experimental Platform And Research On The Descaling Process
10.	Research Of Rolling-shear With Helical Blade For Thin Metal Strip
11.	In-situ Measurement Of Metal Strip Grain Size Based On Laser-ultrasonics
12.	3D Detection Of Surface Defects Of Metal Strips And Plates Based On Photometric Stereo
13.	Research And Application Of Hybrid Particle Swarm Optimization Algorithm In Load Distribution For Tandem Hot Metal Strip Rolling
14.	Rolling Experiment Of Ultra Thin Metal Strip And Its Size Effect
15.	Numerical Simulation Study On The Uniformity Of Temperature Distribution In Transverse Induction Heating Of Metal Strip
16.	Research On Surface Defect Image Clustering Method Of Metal Strip
17.	Design Of Transverse Flux Induction Heating Device For Metal Strips And Optimization Of Key Parameters
18.	Optimized Design And Experimental Study Of Transverse Flux Induction Heating System For Metal Strips
19.	Numerical Simulation Study On Transverse Flux Induction Heating And Temperature Uniformity Of Metal Strips
20.	Temperature Model Research On Warm-rolled Deformation Zone Of Hard-deformed Metal Strip
<<First <Prev Next> Last>> Jump to