Font Size:
a
A
A
Keyword [micro-channel]
Result: 1 - 20 | Page: 1 of 4
1.
Theoretical And Application Research On Minisize Impinging Stream Technology Under Ultra-high Pressure
2.
Research On Reaction Process Intensification Of Biodiesel Production
3.
Theoretical And Experimental Study On Methane Wet-air Autothermal Catalytic Reforming At Low Temperature In The Micro-channel
4.
Experimental Investigation On Bubble Formation In Microchannel T-junctions
5.
Investigations On The Fabrication Of Super-Hydrophobic Surface On Aluminum Micro-Tubes And Water Flow Characteristics In The Tubes
6.
Investigations On Water Flow And Heat Transfer In The Super-Hydrophobic Micro-Channel
7.
Numerical Simulation And Knowledge Discovery Of Micro-channel Flat-tube Rotary Bending In-plane
8.
Research And Structural Optimization Of Methanol Steam Reforming For Hydrogen Production With Non-uniform Distributed Micro-channel Carrier
9.
Experiment Research On The Influence Of Melt Viscosity On The Filling Flow In Micro-injection Molding
10.
Study On The Micro Thixoforming Process Of Semi-Solid A356 Alloy In Meso Scale
11.
Heat Management Of Methanol Steam Reforming Process In Micro-channel
12.
Lattice-Boltzmann Simulation On Fluid Dynamics And Mixing In Micro Channels
13.
Numerical And Experimental Study Of Transient Performance Of Methane Catalytic Auto-Thermal Reforming In Micro-channel
14.
CFD Simuiations And PIV Measurements On Hydrodynamic Behaviour Of Submerged Flat Membrane Bioreactor Equipped With Micro-channel Turbulence Promoter
15.
Lattice-boltzmann Simulation On Fluid Dynamics And Mixing In Micro Channels
16.
Fine Micro-structural Components Of The Injection Molding Process Fountain And Contraction Of The Flow Simulation And Application
17.
.2-T-type Micro-channel Visualization Of Bubble Generation And Crushing Characteristics Experimental Study
18.
Research Of CuO Selective Absorbing Coating And Apply To Solar Collector With A Micro-channel
19.
Study Of The Aqueous Preparation Processes And Properties Of Ⅱ-Ⅵ Group Quantum Dots
20.
The Analysis Of Complex Flowing Behavior Of Injection Molding Parts With Micro-features
<<First
<Prev
Next>
Last>>
Jump to