milling cutter - Globe Thesis

Keyword [milling cutter] Result: 181 - 200 \| Page: 10 of 10
181.	Study On Wear Difference On Flank Face Of High-Feed Milling Cutter
182.	Study On Surface Morphology Of Cutting Titanium Alloy By Shoulder Milling Cutter Under Vibration Action
183.	Research On Cutting Performance Of CFRP And CFRP/Ti Stacks In Unit Edge End Milling Cutter
184.	The Design And Manufacture Of Cycloid Milling Cutter And The Experimental Study
185.	Design Criteria And Experimental Investigation On Micro Textures Of YG8 Ball End Milling Cutter For Cutting Titanium Alloy
186.	Integrated Simulation Optimization Method For Geometric Parameters Of Ball- End Milling Cutter
187.	Design And Optimization Of Ball-end Milling Cutter Parameters For Blunt-round Edge And Micro-texture
188.	Machining Process Optimization Of Nickel Alloy Rhombic Turbine Blade
189.	Experimental Research On Milling Force And Surface Quality Of Milling 300M Steel
190.	Simulation And Experimental Study On Surface Topography And Cutting Force In Ball End Milling
191.	Research On Finishing Theory Of Equal Base Circle Bevel Gear Based On Ball End Milling Cutter
192.	Studying On Welding Residual Stress And Transformation Of Equal-Height Spiral Bevel Gear Milling Cutter
193.	Design Of Helix Angle Of Cutting Edge Of Multi-edge And Micro-tooth Milling Cutter Based On CFRP Oblique Cutting
194.	Research On No Bumping Path Planning For Large Integral Impeller Five-Axis Plunge Milling
195.	Research And System Development Of Nc Grinding Programming Method For Integral Flat-End Milling Cutter
196.	Simplified Prediction Model Of Cylindrical Thread Milling Force And Optimization Of Tool Geometry Parameter And Cutting Parameter
197.	Research On Key Technology Of Ultrasonic Vibration Rounding With Flat End Milling Cutter
198.	Research On Wear Status Monitoring Of Milling Cutter Based On Deep Learning
199.	Research On Dynamic Characteristics Of Anti-Vibration Milling Cutter Based On Milling Chatter Suppression Mechanism
200.	Research On Key Technology Of Milling Cutter Breakage Detection Based On Vibration And Permanent Magnet Perturbation Sensor
<<First <Prev Next> Last>> Jump to