Font Size: a A A
Keyword [mould]
Result: 161 - 180 | Page: 9 of 10
161. Study On Heat Transfer In Mould And Optimization Of Performance For Mould Flux Of FTSC Thin Slab Cast In Tangshan Iron And Steel CO.
162. Study On Effect Of Transition Metal Oxides On Heat Transfer Through Mold Fluxes Film In Continuous Casting
163. Research On Innovative Mould Board Of Injection Machine And Development Of Its Parametric Design System
164. Physical And Mathematical Simulation On The Tundish And Mould For 4-Strand Bloom Continuous Caster In Panzhihua Steel
165. Numerical Simulation On The Cooling Capacity Of Partial Mould Under Natural Condition
166. Research On Device For Fast Testing Permeability And Compactibility Of Green Sand And Compaction Of Mould
167. Research On Front Component (left)/(right) Of Rear Floor
168. Research On Developing Aluminium Mould Of ESC Small Guide Vanes
169. Design And Experiment Research Of Hot Extrusion Simulating Mould
170. Research On Mold Powder And Technology Of Wire-feeding During Thin Slab Continuous Casting For Rare Earth Steel
171. Study On Fluorine Emitting From Continuous Casting Mould Fluxes
172. Development Of Wear And Corrosion Resistant Scroll Cover For New Type Pulping Machine
173. Research On Ball Pen Mould Conceptual Design Technique Based On CBR
174. Application Of Reverse Engineering In Injection Mould Design And Re-develop
175. The Irradiation Cosslinking And Foaming Of Polypropylene
176. Fabraction Of Cu-based Bulk Metallic Glasses And Research On It's Friction And Wear Property
177. Research On Electrodeposited RE-Ni-W-P-B4C Composite Coatings On Surface Of Mould Copper Plate
178. The Processes Research On Large Complicated Stainless Steel Impeller By Melting Modules-Sand Mould Composite Casting
179. Fabrication Of In-situ Al3Tip/Al Based Composites And Their Properties
180. Research On Drawing Forming Of Engine Oil Filter Shell Of Automobile
  <<First  <Prev  Next>  Last>>  Jump to