Font Size: a A A
Keyword [numerial simulation]
Result: 1 - 20 | Page: 1 of 2
1. Numerical Simulation Of Process Mode And Deformation Defects On Multi-Point Forming
2. Numerial Simulation Of Plate Rolling Process And Optimization Of Technology
3. Numerial Simulation Of Diffusion Failure Of Cemented Carbide And Optimized Design Of Cutting Tools' Composition
4. The Structure Analysis Of Tube Plate And Numerial Simulation Of The Heat Exxhanger Performance
5. Numerial Simulation Of The End-quanching Process In 40Cr And 60Si2Mn Steels
6. The Research On The Technology Of Whole Roll Forging Making Billets Of Connecting Rod Of Large And Different Sections Based On Numerial Simulation
7. Numerical Simulation Research Of Interphase Transport Behavior In Froth Flotation Column
8. Numerial Simulation Of Ventilation Temperature And Humidity Law Of Underground Airways In Coal Mine
9. Experimental Investigation And Numerial Simulation Of Residual Stress Of High Strength Steel After Surface Strengthening
10. Study On Stress-strain Field And Microstructure Of The Local Laser Surface Treatment In Ni-base Alloy
11. The Study Of Numerial Simulation Of Air Flow Within The Rotor Spinning Rotor
12. Study On Numerial Simulation And Optimization Of Steel Wheel Rim Rolling Processing
13. Research On Airflow Field Simulation And Coal Movement Characteristics In Cement Kiln
14. The Transient Flow Analysis And Numerial Simulation Research Of Multi-stage Fractured Horizontal Well With In Tight Gas Reservoirs
15. Numerical Simulation And Experimental Research On The Internal Flow Field Of Rotating Variable Diameter Pipe
16. Numerical Simulation And Experimental Study Of Cold Drawing Of Magnesium And Magnesium Alloys Based On Deform-3D
17. The Evolution Law And Numerical Simulation Of Pore Solution Ion In Modern Concrete
18. Morphology And Mechanical Properties Of Water Assisted Injection Molded Polypropylene/Polyamide6 Blends
19. Research On The Thermal Performance Of Ba(OH)2·8H2O And Numerial Simulation During Heat Exchange
20. Morphology And Mechanical Properties Of Water Assisted Co-Injection Polypropylene/Polyamide 6 Blend
  <<First  <Prev  Next>  Last>>  Jump to