Font Size: a A A
Keyword [one-step]
Result: 61 - 80 | Page: 4 of 10
61. The Design And Research Of Fully Dynamoelectric Multi-Location Vertical One-Step Injection Molding Machine And Simulation Of 3D Dynamic Process
62. The Design And Research Of The Three Stations Vertical Injection Equipment For Rubber Stator Of Screw Drill And Screw Pump And Simulation Of 3D Dynamic Process
63. Preparation Method Of C/C Composites Through One Step
64. One-step Synthesis Of Quaternary Ammonium Salts From Ammonium Or Aminium Salts And Carbonates Over Ionic Liquid Catalyst
65. Study On Catalysts And Reaction Rules Of MMA From MAL By One-Step Oxidative Esterification
66. The Study Of Synthesis Technology Of Cyclohexyl Phenyl Ketone In One Step
67. Optimal Design Of Drawing Die Surface For Automobile Panel
68. Study On The Catalysts And Process For Direct Synthesis Of Dimethyl Ether From Syngas
69. Study On Doped Polyaniline
70. Research On Preparation Process Of The Green Water Reagent Potassium Ferrate
71. Software Development Of Unfolding Of Stamping Complex Parts Based On NX Platform
72. Research On Numerical Simulation For The Process Of Blanking-welding Drive Axle Housing
73. The Synthesis And Application Of Novel Mesoporous Environmental Materials
74. Preparation Of Y-TZP/MgAl2O4 Ceramic Composite And Research On Its High-Strain-Rate Superplasticity
75. Based On The Numerical Simulation Of Automobile Panel Of Key Parameters
76. One-Step Synthesis Of Ordered Mesoporous Carbon And Its Application In Supports Of Catalysts
77. Synthesis Of Ordered Mesoporous Carbon Via A Soft Template Route
78. Defects And Properties Analysis Of Cemented Carbide By PIM
79. Study On CAD/CAE/CAM Technology Of Auto Panel Stamping Mould
80. The Research On One-pot Synthesis Of DMC
  <<First  <Prev  Next>  Last>>  Jump to