parameter - Globe Thesis

Keyword [parameter] Result: 161 - 180 \| Page: 9 of 10
161.	Research On The Influence For Weld Residual Stress And Weld Numerical Simulation Between Hollow Ball And Pipe
162.	Studies On Process Modeling And Its Application For Catalytic Cracking
163.	Analysis Of Keyhole Shape In Plasma Arc Welding Based On Force-balance Condition
164.	Study Of Parameter Calculation And Technology Of Foam Drilling In Block 1of Yemen
165.	Research On The Key Technology Of The Topological Feature Reconstruction And Sampling Point Distribution In OMV
166.	Research On Dynamic Programming For Polymer Flooding In Enhanced Oil Recovery
167.	Estimation And Prediction Of Drilling Geologic Characteristic Parameters Based On Multi-source Information Fusion
168.	Study On Quench Sensitivity Of 7050 Alloy And Its Mechanism
169.	Study On Similarity Theory Method For The Comprehensive Analysis To Prediction Parameter And Angular Parameters Of Mining Subsidence
170.	Productivity Evaluation And Completion Parameter Optimization Of Perforating Completed Horizontal Wells
171.	Study On Real-time Dynamic Acoustic Emission Detection And Growth Mechanism Of Diamond Under HPHT
172.	Microscopic-Macroscopic Multi-Parameter Coupling Model Building For Low-Alloy Steel Strip Hot Rolling Process
173.	Study On Preparation Of High Silicon Steel By Molten Salt Pulse Electrodeposition
174.	Study On Thermophysical Properties Measurement And Temperature Field Distribution Of Loose Coal Bulk
175.	Characteristics Of Swiss-roll Combustors Using For Ventilation Air Methane
176.	Study On The Optimization Of Freeze-drying Protocol For Human Platelets
177.	Study On Percussive Drilling Efficiency Of Water Powered Percussive Rock Drill In Deep Mining
178.	Optimum Material Proportion And Transportion Parameter Of Multiphase Complex Paste Backfill
179.	Study Of Fabricated Rice And Systematic Model On Twin-screw Extruder
180.	Research On Variation Mechanism Of Reservoir Parameter Under The Condition Of Layered Water Injection And Dynamic Allocation Method Of Injection Allocation Parameters
<<First <Prev Next> Last>> Jump to