plastic strain - Globe Thesis

Keyword [plastic strain] Result: 21 - 40 \| Page: 2 of 4
21.	Investigations On Cyclic Deformation And Damage Behavior Of AL6XN Super-Austenitic Stainless Steels
22.	The Fem Simulation Of Straightening Process Of Plate And The Calculation Of Bending Roller Device’parameter
23.	Application Of Digital Image Correlation Method In Study Of Material Deformation
24.	Effect Of Cyclic Pre-deformation On The Uniaxial Mechanical Properties Of Copper Single Crystals With Different Orientations
25.	Groove Design And Numerical Simulation Of Bar Ferritic And Multidirectional Rolling
26.	Experimental Research On Mechanical Property Of AX31Plate、5052Plate And Magnesium-aluminum Composite Plate
27.	Strain Analysis And Crystal Plasticity Finite Element Simulation Body Diameter Plastic To Forging Process
28.	Simulation Of The Process Of Large-scale Roll-formed Tubular Member
29.	Welding Deformation Control Technoque Research Of Thin Plate
30.	Effect Of Cyclic Pre-deformation On The Uniaxial Tensile Properties Of Cu-7at.%Al Alloy
31.	Analysis Of Wrapping And Unwrapping Of Coiled Tubing And Its Fatigue Life
32.	Investigation On Fracture Assessment Methods For Reeled Offshore Pipelines
33.	Research On Surface Affected Layer In Grinding Ultra-high Strength Steel
34.	Modeling And Strip Edge Bending Analysis Of Welded Tubes On The Cage Roll-forming Mill Of HFW 660
35.	Research On Slender Bar's Key Technology Straightening Process
36.	Analysis On Fatigue Life Of Coiled Tubing With Defects
37.	Microstructure And Mechanical Properties Of In Situ TiZr-based Amorphous Matrix Composites Enhanced By Dendrites
38.	Research Of The Application Of Digital Image Correlation Method In Mechanical Properties Measurement Of Steel Materials
39.	Experimental Study On Subsequent Yield Surface Evolution Of Nodular Cast Iron
40.	Finite Element Simulation Study On Bending Process Of Large-caliber Thick-wall Tube By Induction Heating
<<First <Prev Next> Last>> Jump to