Keyword [poly(methyl methacrylate)]
Result: 121 - 140 | Page: 7 of 8 |
| 121. | Enzyme immobilization on poly(methyl methacrylate) (PMMA) surfaces |
| 122. | Characterization of poly(methyl methacrylate) and thermoplastic polyurethane-carbon nanofiber composites produced by chaotic mixing |
| 123. | Multiphase biocompatible polymer blends from poly(L-lactide) and poly(methyl methacrylate) |
| 124. | Characterization of chemically modified silicon (111), poly(methyl methacrylate), and poly(dimethylsiloxane) surfaces by chemical force microscopy and X-ray photoelectron spectroscopy |
| 125. | Experiments, Constitutive Modeling, and Multi-Scale Simulations of Large Strain Thermomechanical Behavior of Poly(methyl methacrylate) (PMMA |
| 126. | Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating |
| 127. | Biocompatible tactic poly(methyl methacrylate) electrospun fibers |
| 128. | Mechanical and gas-transport behavior of poly(methyl methacrylate) dense films at elevated temperatures |
| 129. | The interfacial modification of poly(styrene)/poly(methyl methacrylate) interfaces using alternating and random copolymers |
| 130. | Fabrication and physical properties of transparent poly (methyl-methacrylate)-layered silicate nanocomposites |
| 131. | Kinetic pyrolysis of poly(methyl methacrylate) and its effects on the ignition delay time |
| 132. | Time-dependent compressibility of poly(methyl methacrylate) (PMMA): An experimental and molecular dynamics investigation |
| 133. | Preparation and properties of optically transparent poly(methyl methacrylate) glass fiber sandwich composites |
| 134. | The effect of some additives on the thermal degradation of poly(methyl methacrylate) |
| 135. | Retention behavior of poly(methyl methacrylate), poly(ethylene glycol) and poly(tryptophan) in reversed-phase liquid chromatography |
| 136. | Preparation and properties of optically transparent, pressure-cured poly(methyl methacrylate) composites |
| 137. | Sensitivity enhancement of poly(methyl methacrylate) by radiation-induced modification and degradation of PMMA by deep UV, x-ray,e-beam and proton beam irradiations |
| 138. | Modeling and in situ ellipsometry of swelling and dissolution of poly(methyl methacrylate) thin films |
| 139. | TEMPERATURE- AND SOLVENT-INDUCED CONFORMATIONAL TRANSITIONS OF STEREOREGULAR POLY(METHYL METHACRYLATE) BY FTIR, FT-NMR, AND SMALL ANGLE X-RAY SCATTERING (POLYMETHYL) |
| 140. | Correlation between molecular structure and self healing in a series of anthraquinone derivatives doped in poly(methyl methacrylate) |
|
