Font Size: a A A
Keyword [rapid]
Result: 1 - 20 | Page: 1 of 10
1. Rapid Solidification Of Undercooled Peritectic Alloys
2. Effects Of Cyclic Heat Treatment On Microstructures And Mechanical Properties Of TiAl-based Alloy
3. Study On The Production Of Heat-resistant Aluminum Alloy Pipe Blanks With Large Dimensions By Multi-layer Spray Deposition
4. Study On The Process,Devices And Principle Of Multi-Layer Spray Co-Deposition Technology For The Preparation Of Large-Sized SiC Particulate-Reinforced Aluminum Alloy Composites
5. Preparation And Transport Properties Of β-FeSi2 Based Thermoelectric Materials
6. Application Research On Selective Laser Sintering
7. The Simulation Study Of Molecule Dynamics On Transition Of Microstructure During The Rapid Cooling Process Form Al Liquid State(943K)to Amorphous State
8. The Process And Mechanical Properties Of High Silicon-content Aluminum Alloy By Multi-Layer Spray Deposition Technology
9. Study On The Numerical Controlled Jet Electroforming
10. Thermophysical Properties And Rapid Solidification Of Undercooled Metallic Melts
11. Study On Direct Selective Laser Sintering Of Ni-Based Metallic Powder And Key Technologies
12. Study On Precipitation Of Supported Metallocene Catalyst Microparticles By Rapid Expansion Of Supercritical Solutions
13. Study On Constructed Rapid Infiltartion System For Wastewater Treatment
14. An Investigation On The Structural And Electrochemical Properties Of The TiV-Based Hydrogen Storage Electrode Alloys
15. Effect Of Organic And Inorganic Matters On Microbial Biomass And Rapid Degradation Of Herbicides In Contaminated Soils
16. Experimental Study On Laser Sintering Of N-Al2O3 & N-Al2O3/Polystyrene Composites Powders
17. Rapid Prediction Methods And Models Of Methane Emission And Manure Nutrient Contents From Beef Cattle
18. Study On Key Techniques Of Template Based Rapid Design For Automobile Panel Stamping Process
19. Research On Mechanism Of Bioreactor Landfill For Rapid Degradation Of Municipal Refuse And Biological Nitrogen Removal
20. Research On Rapid Shape Adjusting And Forming Process Automation In Multi-point Forming
  <<First  <Prev  Next>  Last>>  Jump to