rapid solidification - Globe Thesis

Keyword [rapid solidification] Result: 41 - 60 \| Page: 3 of 10
41.	Theme Of Thesis: Formation And Properties' Study Of Aluminum Amorphous And Nano-crystal Alloy
42.	Crystallization Of Amorphous Ni-P Alloys By Pulsed Laser Irradiation
43.	Research Of Metal Silicide Thermoelectric Materials Prepared By Rapid Solidification And Hot Pressing
44.	The Study And Control Of Metastable Phase In High Speed Steel As-Cast Strip
45.	Structural Evolution And Solidification Behavior Of Highly Undercooled Copper-Lead Monotectic Alloy Melts
46.	Microstructure Transformation And Control Of Stainless Steel Under Near-rapid Solidification
47.	Study On The Process Of Fabricating Fine Stainless Steel Powder By Gas And Solid Dual-phase Atomization
48.	Study On High Strength And Electric Conductivity Copper Alloy Prepared By Nano-Carbon Fiber Composite And Rapidly Solidification Methods
49.	The Phase Structures And Electrochemical Properties Of Melt-spun Low-Co And Co-free AB₅-type Hydrogen Storage Alloys
50.	Rapid Solidification And Cooling Behavior Prediction Of Sn-Pb Alloy Droplet Produced By Uniform Droplet Spray
51.	The Research On Properties And Bonding Mechanism Of Armorphous Cu-P Filler Metals
52.	Microstructure And Properties Of Rapidly Solidified Magnesium Alloy
53.	Research On The Preparation Process, Microstructure And Properties Of AZ91 Magnesium Alloy Via Rapid Solidification
54.	Effects Of Solidifying Condition On Microstructure And Nucleation Dynamics Of Mg-Zn-Y Alloys
55.	Effect Of Rare Earth Yttrium On Microstructure Of Rapidly Solidified Titanium Aluminum Based Alloys
56.	Study On The Microstructures And Corrosive Properties Of Mg-Zn-Y Alloys
57.	Research On Aluminum Matrix Composites Reinforced With Intermetallics
58.	Microstructure And Properties Of Rapidly Solidified Cu-Sn Hypoperitectic Alloys
59.	The Microstructures And Mechanical Properties Of Mg-Zn-Y Magnesium Alloys
60.	The Microstructures And Mechanical Properties Of Magnesium Alloys Prepared By Rapid Solidification And Extrusion
<<First <Prev Next> Last>> Jump to