residual wall thickness - Globe Thesis

Keyword [residual wall thickness] Result: 1 - 18 \| Page: 1 of 1
1.	Study On Water-assisted Injection Molded Nylon-6 And Nylon-6/montmorillonite Nanocomposites
2.	Study On Processing Conditions And Products Properties Of Water Assisted Injection Molding
3.	With Remaining Life Prediction Method Of Corrosion Defects In Pipelines
4.	Numerical Simulation And Experimental Study On Gas-assisted Co-injection Molding Process
5.	Study On Numerical Simulation For Water-Assisted Injection Molding
6.	Study Of Penetration Mechanism And Robust Optimization Of Processing For Water-assisted Injection Molding
7.	A Study Of The Reason For Casing Corrosion In The Asp Flooding And The Critical Residual Wall Thickness
8.	Numerical Simulation For Water Penetration In Water-Assisted Injection Molding Based On Two-Phase Flow Principle
9.	Design Of Water-Assisted Injection Molding System And Research On Parts Residual Wall Thickness
10.	Research On Detection Method Of Residual Wall Thickness Of Process Pipeline Corrosion In Oil And Gas Gathering And Transportation Station
11.	Study On Mechanism And Optimization Of Penetration And Fiber Orientation In Short-Fiber-Reinforced Polymer Water-assisted Injection Molding
12.	Optimization Of Fluid-assisted Co-injection Molding Process For Complex Muti-layer Pipe
13.	Research On Mechanism Of Water-assisted Injection Molding Short Fiber Reinforced Polymer Pipe Parts
14.	Molding Mechanism And Key Technology Of Water Projectile-Assisted Injection Molding Process
15.	Gas-assisted powder injection molding: A comparison of residual wall thickness between metal cavity vs. SLA cavity and effect of mold temperature on residual wall thickness
16.	An experimental study to investigate the influence of processing conditions in the gas-assisted injection molding process
17.	Experimental Research On Gas-Water-Assisted Injection Molding Process
18.	Numerical Simulation Of Gas-water-assisted Injection Molding Filling Penetration Process
<<First <Prev Next> Last>> Jump to