Font Size: a A A
Keyword [retained austenite]
Result: 161 - 180 | Page: 9 of 10
161. Study On Air-Cooled Q&P Process Of Ultra-High Strength Hot Formed Steel Sheet
162. Studies On Processing Of Laser Cladded Fe-based Coatings With Grain Boundaries Tonghening
163. Numerical Simulation And Experimental Study On Carburizing-quenching Process Of 18CrNiMo7-6 Alloy Steel
164. Study On Structure Evolution And Toughness Mechanism Of Advanced High Strength Steel Based On Carbon Partitioning
165. Effect Of B Content And Q&P Process On Microstructure And Mechanical Properties Of High-boron Iron-based Wear-resistant Alloys
166. Study On Microstructure Evolution Behavior Of Nb-containing Manganese TRIP Steel During Critical Annealing
167. Phase Transformation Behavior,Microstructure And Mechanical Properties Of Aluminum-containing Medium Manganese Steel With Low Manganse Content
168. Study Of Microstructure And Mechanical Properties Of Quenched-partitioned Medium Manganese Wear-resistant Steels
169. Study On Differential Heating Heat Treatment Of High Chromium Cast Iron Rolls
170. Simulation Calculation And Experimental Study On Quenching And Partitioning Of QP980 Steel
171. Study On Microstructure Control And Low Temperature Toughness Of 700MPa Grade Offshore Steel
172. Stability Of Retained Austenite In High Strength Offshore Steel And Its Effect On Mechanical Properties
173. Study On Microstructure Evolution And Mechanical Properties Of Strip-casting Medium Manganese Steel
174. Control Of Microstructure And Mechanical Properties Of Low-carbon And Low-alloy High Strength Automobile Steel
175. Research On Microstructure Evolution And Mechanical Properties Of High-Strength Medium Mn Q&P Steel
176. Martensite/austenite Multiphase Microstructure Control In Medium-thick Wear-resistant Steel
177. Effect Of Vanadium And Heat Treatment Process On Microstructure And Properties Of High Strength Plastic Bainitic Steels
178. Numerical Simulation And Experimental Research On The Controlled Cooling Process Of Bainitic Rail
179. The Effect Of Cold Treatment On The Microstructure And Structure Of High Cr-Co-Mo Bearing Steel
180. The effect of phase morphology and volume fraction of retained austenite on the formability of transformation induced plasticity steels
  <<First  <Prev  Next>  Last>>  Jump to