rolling bonding - Globe Thesis

Keyword [rolling bonding] Result: 1 - 20 \| Page: 1 of 2
1.	Large Deformation Of Ultrafine Grained Copper Asynchronous Arb To Prepare Technical, Microstructural Evolution Process And Performance
2.	Large Deformation Arb Prepares Ultrafine Grained Copper Texture Organizations Evolution
3.	Study On Bearing Alloys With Higher Properties And Manufacturing Technology Of Completely-Restrained Rolling
4.	Research On Semisolid Casting-rolling Bonding Of Steel-backed Al-28Pb Bonding Plate
5.	Discussion On Mechanism For Vacuum Hot Rolling Bonding Of Titanium Alloy And Stainless Steel
6.	Study On Clad-rolling Of Aluminum-coated Magnesium Composite Plates And The Properties Of Interface
7.	Preparation And Characterization Of Casting-rolling Bonding 2cr13/9cr18mov/2cr13 Stainless Steel
8.	The Research On Simulation Of Composite Cold Rolling Plate Of Stainless Steel
9.	Numerical Simulation Of The Rolling Process Of Cu-u Composite Plate
10.	Magnesium Alloy And Aluminum Alloy Hot-rolled Composite Basic Research
11.	Preparation Of Ultrafine Twins Copper. The Large Deformation Asynchronous Roll Supplemented With Heat Treatment And Its Formation Mechanism Study
12.	Study On Bonding And Post Treatment Of Steel-backed Copper-graphite Bearing Plate
13.	The Physicial Simulation And Numerical Prediction Research On Hot Rolling Bonding Of Heavy-gauge Stainless Steel Clad Plate
14.	Large Deformation And Properties Of Induction Heat Treatment ARB Regulation And Ultrafine-grained Copper Organizational Structure
15.	Study On Rolling Process And Microstructure And Properties Of Cu/Al-Zn Clad Strip
16.	Study On Cold Rolling Bonding Process And Performance Of 4343 Aluminum Alloy/4A60 Aluminum Alloy/08Al Steel Three-layer Composite Strips
17.	Study On Liquid-liquid Casting-rolling Bonding Ot Steel-Al20Sn Composite Plate
18.	Research On Semisolid Casting-rolling Bonding Of Steel-Ti Bonding Plate
19.	Research On The Rolling Bonding Mechanism And The Growth Behavior Of Intermetallic Compounds At Aluminum Steel Composites Interface
20.	Microstructure Analysis Of 2205/Q235 Hot Rolling Bonding Interface And Duplex Stainless Steel
<<First <Prev Next> Last>> Jump to