rolling force - Globe Thesis

Keyword [rolling force] Result: 41 - 60 \| Page: 3 of 9
41.	Force Model Research And Application Of Strip Cold Rolling Mill
42.	Process Optimization And Numerical Analysis On Cone-Type Piercing
43.	Application Of Improved Rotative Mid-point Mensuration And Newton Method In Flat Rolling
44.	Study On Technology Of Flying Gauge Change And Thickness Preset For Tandem Cold Mill
45.	Coupled Numerical Simulation Of Velocity And Temperature Field In Flat Hot Rolling Process
46.	Combining Trust-region And Newton Algorithm In Flat Rolling
47.	Application Of Modified Gradient And Newton Method In Flat Rolling
48.	Study On Simulate And Suppress Chatter Of Large Strip Tandem Cold Rolling Mills
49.	Simulation And Research About TC4Alloy’s Rolling Process Based On Phase Change
50.	Research On The High-speed Wire Rod Rolling Force Models Of GCr15and Its Controlled Cooling Technology
51.	Numerical Simulation And Experimental Study On Thixo-Rolling Process Of7050Aluminum Alloy
52.	Research On Process And Organizational Performance Of Cross Wedge Rolling Of Non-ferrous Metal Aluminum Alloy
53.	Study On The Extracting Method Characteristics Of Rolling Force Signal Information Of The Rolling Mill
54.	Research On The Control Method Of Molten Steel Level Control And Rolling Force Control For Twin-Roll Casting
55.	Research On Settings Optimization For Reversible Single Stand Cold Rolling Mill
56.	Optimization Of Aluminum Tandem Hot Rolling Schedule Based On Cuckoo Algorithm
57.	Analysis And Verification Of The Vertical Rolling Force And Shapes Based On Cosine Function Dog-Bone Model In Rough Rolling Process
58.	Study On Predictive Control And Optimization Simulation For The Rolling Force Of Cold Mill
59.	Research On Rolling Force Model And Experiment For Variable Gauge Cold Rolling
60.	Study On Mechanical Analysis And Frame Structural Strength Of Steckel Mill Rolling
<<First <Prev Next> Last>> Jump to