Font Size:
a
A
A
Keyword [rolling reduction]
Result: 1 - 20 | Page: 1 of 3
1.
The Effects Of Cold Rolling Reductions On Microstructure And Texture Of Ti+P-IF Steel
2.
The Development Of Cold Rolling Process For Fine Grain High-strength IF Steel
3.
Effects Of Ferrite Rolling Processing On Microstructure And Properties Of IF-HS Steels
4.
Study On Improving The Quality.of Secondary Wedge Rolled Pieces By Non-Uniform Temperature Field
5.
Effect Of Annealing Temperatures And Strain Rates On Tensile Properties Of Fe-20Mn-0.6C TWIP Steel
6.
.cu / Al Laminated Composites Combine The Mechanism And Interfacial Reaction
7.
Cold Plate Straightening Process Parameters Study And Mathematical Model Of Optimization
8.
Simulation Of Stainless Steel Clad Plate Hot Rolling
9.
Effect Of Cold Rolling Reduction On Mechanical Properties Of Low Carbon Al-Killed Steel Sheet
10.
Microstructures Evolution Of As-cast And Hot-rolled High Aluminum 304ă316Lă310S Stainless Steels And Effects Of Al On Microstructure
11.
Research On Secondary Rolling Post-processing Of Steel Cu-graphite Bonding Plate
12.
Study On Plate Straightening Simulation And Residual Stress
13.
Study On Impact Of Rolling Reduction Ratio On The Cladding Properties Of Heavy Gauge Roll-Cladding Steel Plate
14.
Grooveless Rolling Reduction Procedure Designed And Numerical Simulation Of Foeming Process
15.
Effect Of Hot Rolling Reduction On Microstructure And Mechanical Properties In Hot Rolled High-strength Strip
16.
Effect Of ART Annealing And Rolling Condition On The Microstructure And Mechanical Properties Of Medium-Mn Steel
17.
Process Of Forming A Micro-channel Integral Finned Tube Heat Pipe Cross Rolling
18.
Rolling Process Parameters On The Bonding Strength Of The Stainless Steel / Carbon Composite Plate Interface
19.
Study On Microstructures And Deep-Drawabilities Of Aluminum Killed Low-Carbon Steel Sheets During Single Stand Reversing Cold Rolling
20.
Research Of Crystallographic Textures And Magnetic Property In Rolled And Recrystallized Fe-Ga Sheet
<<First
<Prev
Next>
Last>>
Jump to
