rolling reduction - Globe Thesis

Keyword [rolling reduction] Result: 21 - 40 \| Page: 2 of 3
21.	Investigation On The Roughness Of Plate And Strip Based On Crystal Plasticity Theory
22.	Study On Correlation Between Deformation And Recrystallization Textures And Rolling Parameters In Non-oriented Silicon Steel
23.	Effect Of Cold Rolling On The Evolution Of Recrystallization Texture In Grain-oriented Silicon Steel
24.	Study On Deformation And Recrystallisation Texture In High Silicon Steel Sheet Under Different Cold Rolling Reduction
25.	Study On The Sagging Resistance Of The Aluminum Clad Sheet Of Heat Exchanger By Processing Technology And Brazing Process
26.	Study On The Effects Of Different Cold-rolling Reduction On The Texture Development Of Grain-oriented Silicon Steel
27.	Study On Preparation Of Nano/micro-scale Ultrafine Grained Low Carbon Steel By Cold Rolling And Annealing
28.	The Texture Evolution Of 3.0%Si Grain Oriented Silicon Steel In The Preparation Process
29.	Investigation On Rolling Process And Interface Morphology Of Mg/Steel Composite Plate
30.	Influences Of Rolling Process On Bonding Quality Of Stainless Steel Clad Plate
31.	Effect Of Cold Rolling Process Parameters And Reduction Annealing Time On Iron Oxide Scale
32.	Study On Texture Evolution And Grain Boundary Distribution Of 301L Stainless Steel Under Different Cold Rolling Reduction Ratios
33.	Research And Development Of Ultra-Thin Non-Oriented Silicon Steel
34.	The Research Of The Formation Process Of The Intracrystalline Shear Bands In Fe/Fe And Fe/Ni Laminated Composite
35.	Research On Interface Microstructure Regulation And Toughening Mechanism Of Stainless Steel Clad Plate
36.	Research On Reduction Rate Control Of Thin-Gauge Grain-Oriented Silicon Steel
37.	Research On The Process Of Low-cost Third-generation Automotive Steel
38.	Effect Of Asymmetric Rolling And Annealing Process On The Microstructure,Texture And Properties Of Non-oriented Silicon Steel
39.	Microstructure And Properties Of 6Cr13 Martensitic Stainless Steel Under Different Rolling Reduction Rates
40.	Evolution Of Microstructure And Texture During Rolling Process Of Low Temperature Oriented Silicon Steel
<<First <Prev Next> Last>> Jump to