Font Size: a A A
Keyword [shear zone]
Result: 1 - 20 | Page: 1 of 1
1. Effects Of Asymmetrical Rolling On Microstructures And Properties Of Aluminium And Aluminium Alloy Strip
2. Study On Microscopic Mechanism Of Instability In The Primary Shear Zone During High Speed Machining Hardened Steel
3. The Research Of Microstructure And Mechanical Properties On Zr-based Bulk Metallic Glass
4. Ti-6al-4v Adiabatic Shear Deformation Microstructure Evolution Mechanism Of The Thermal / Mechanical Parameters Of The Numerical Simulation Of The Shear Zone
5. Two Dynamic Loading Conditions On The Shear Zone Of 7075 Aluminum Alloy, The Impact Of Self-organization And Injury
6. Research On The Influence Of Shear Design Parameters During Parallel Shearing Process
7. Research And Application Of Merchant Cutting Model Based On The Unequal Division Shear Zone
8. Analysis On The Metal3D Plastic Deformation Of The Cross Shear Rolling
9. Study On The Fracture Mode Of The Material In The Main Shear Zone Of Dry Hard Cutting
10. Microstructure Evolution And Plastic Deformation Behavior Under The Effect Of Temperature And Stress In Bulk Amorphous Alloys
11. Research Of Failure Mechanisms Of Bulk Metallic Glass Composites Based On Finite Element Simulation
12. Identification of the Material Constitutive Equation for Simulation of the Metal Cutting Process
13. A generalized approach for mechanics of chip formation in steady-state and dynamic orthogonal metal cutting using a new model of shear zone with parallel boundaries and its validation to cutting-forces prediction in self-piloting machining
14. Quantification of deformation fabrics in various rocks using magnetic anisotropy
15. Study On Dynamic Mechanical Response And Substructure Transformation Of Adiabatic Shear Zone Of TB6 And Ta-2.5W Alloy
16. Numerical Simulation Of Plastic Deformation Zone And Rolling Force Model Of Vibration Composite Cast-Rolling
17. Simulation And Experimental Study On Deformation Law Of Asynchronous Hot Rolling
18. Slip Line Field Of Adiabatic Shear Band In Cutting Process
19. Modeling Of The Catastrophe Of Chip Flow Angle In Transverse Turning Based On The Improved Unequal Shear Zone Model
20. Numerical Simulation And Experimental Research On Turning Process For Laser-assisted Machining Of Fused Silica
  <<First  <Prev  Next>  Last>>  Jump to