Font Size: a A A
Keyword [sheets]
Result: 1 - 20 | Page: 1 of 10
1. Study On Morphological Structure And Properties Of High-Performance Polyolefin Sheets Extruded In Complex Stress Fields
2. Study On Fabrication Of Integrated Microelectrodes On Polycarbonate Sheets Used For Amperometric Detection Coupled To Chip-based Capillary Electrophoresis
3. Lowering The Core Loss Of Grain-Oriented Silicon Steel Sheets By Means Of Laser Processing
4. Study Of Hydriding Combustion Synthesis Mg-Ni Hydrogen Storage Alloy And Doping For Improving Its Performance
5. Behavior Of Flame Spread Downward Over Typical Wood Sheets And Heat Transfer Analysis
6. Study On The Process And Principle Of Powder Rolling Technology For Preparation Of High Silicon Steel Sheets
7. Preparation Of Nanosized Carbon Materials By Detonation Technique And The Corresponding Research On Mechanism
8. Study On Laser Brazing With Filler Wire For Galvanized Steel Sheets And Numerical Simulation Of The Thermal Process
9. Study On Applied Properties Of Al-Mg-Mn And Al-Mg-Mn-Sc-Zr Alloy Sheets And Its Related Fundamental Research
10. Design Of Ti/Ti-Al Microlaminated Sheets And Its Preparation By EB-PVD Technology
11. Principles And Techniques In Preparation Of Superplastic Al-Li Sheets
12. Synthesis, Characterization And Properties Of Carbon And Carbonaceous Composite Materials
13. Study Of Hot-working Properties And Warm Deep Drawing Processing Of Twin-roll-cast AZ31 Magnesium Alloys Sheets
14. Deformation Characteristics Of Mg-Al-Zn Magnesium Alloy Sheets In Moderate Temperatures
15. Study On Weld Nugget Formation And Process Optimization In Weld-Bonding Of Multiple Steel Sheets
16. Study On Microstructures And Deep-Drawabilities Of Ferritic Rolled P-Added High Strength IF Steel Sheets
17. Study On The Toughening Modification Of Cast PMMA Sheets
18. Research On The Technology Of Electrical Discharge Surface Texturing And The Modeling
19. Effects Of High Efficient Melt-Treatment On Improving The Metallurgical Quality And The Mechanical Properties Of High Performation Aluminum Sheets
20. Study On The Properties And Morphological Structure Of The Polyolefin Sheets Solid-State Extruded In Complex Stress Field
  <<First  <Prev  Next>  Last>>  Jump to