spray deposited - Globe Thesis

Keyword [spray deposited] Result: 1 - 20 \| Page: 1 of 2
1.	The Research Of Large-diameter Aluminum Alloy With Series Of High Performance And Alteration Mechanism Of Residual Stress During Quenching
2.	Research On Densification Technology Of Spray Deposited Aluminum Alloy
3.	The Microstructures And Mechanical Properties Of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy
4.	Researches On Preparation And Wedge Pressing Densification Of Large-Scale Spray Deposited Aluminum Alloy Tubular Preform
5.	Solidification Behavior Of Spray Deposited Al-Zn-Mg-Cu Alloys And Their Microstructural Evolution During Thermal Processing
6.	The Behaviour Of Compression Deformation And Forging Technology Of Spray Deposited 7075/SiC_p Composite
7.	Study On The Densification Process Of Spray-deposited 5A06 Aluminum Alloy By Wedge Pressing
8.	Numerical Simulation On Wedge Deformation Of Spray-deposited 5A06 Aluminum Alloy
9.	Researches Of Microstructues And Properties Of Spray Deposited Al11.3Zn2.4Mg1.1Cu Alloy
10.	Numerical Simulation On Extrusion Deformation Of Spray-deposited 7075/SiC_p Aluminum Matrix Composite
11.	Effect Of Temperature Gradient Cyclic Pressing On Densification Of Spray Deposited SiC_p/7090 Aluminum Matrix Composite
12.	Deformation Behaviors Of Spray Deposited Ultrahigh Strength Al Alloy By ECAP
13.	Study On Microstructure And Mechanical Properties Of Spray Deposited Magnesium Alloys
14.	Study On Hot Deformation And Ageing Precipitation Behavior Of The Spray Deposited Al-Zn-Mg-Cu Alloy
15.	The Effect Of Hot Extrusion On Microstructure And Mechanical Properties Of The Spray-Deposited Al-Zn-Mg-Cu Alloy
16.	Study On Subsequent Processing And Microstructure And Properties Of Spray Deposited GCr15 Bearing Steel
17.	Study On Process Of Cast-in Of Spray Deposited High Silicon Aluminum Alloy Cylinder Liner
18.	Research On High-aspect-ratio Small And Micro Hole EDM Technology Of Spray Deposited Light High Silicon Aluminum Alloy
19.	A Study On The Microstructure Of Spray-deposited Magnesium Alloys During The Thermal Compression Process
20.	A Study On The Hot Rolled Organization And Textures Of Spray-deposited Magnesium Alloys Containing Nd
<<First <Prev Next> Last>> Jump to