spray deposition - Globe Thesis

Keyword [spray deposition] Result: 1 - 20 \| Page: 1 of 5
1.	Study On The Production Of Heat-resistant Aluminum Alloy Pipe Blanks With Large Dimensions By Multi-layer Spray Deposition
2.	The Process And Mechanical Properties Of High Silicon-content Aluminum Alloy By Multi-Layer Spray Deposition Technology
3.	The Researches On Deformation And Fracture Behaviors Of Porous Materials Prepared By Spray Deposition During Compression And Rolling
4.	The Spray Deposition Technology For The Preparation Of 7075/SiCp Composites With Large Dimensions And Following Processing Issues
5.	Investigation Of Hot Processing, Microstructure And Properties Of Spray Deposition SiC_p/Al-Fe-V-Si Composite
6.	Research On Densification Technology Of Spray Deposited Aluminum Alloy
7.	The Microstructures And Mechanical Properties Of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy
8.	Influence Of Plastic Deformation On The Distribution Of SiC And The Microstructure And Properties Of Multi-layer Spray-deposition 7090Al/SiC_p Composite
9.	Researches On Preparation And Wedge Pressing Densification Of Large-Scale Spray Deposited Aluminum Alloy Tubular Preform
10.	Solidification Behavior Of Spray Deposited Al-Zn-Mg-Cu Alloys And Their Microstructural Evolution During Thermal Processing
11.	Microstructures And Properties Of Aluminum Alloy With Heat- And Wear-Resistance Prepared By Spray Forming
12.	The Behaviour Of Compression Deformation And Forging Technology Of Spray Deposited 7075/SiC_p Composite
13.	Microstructure And Properties Of Heat- And Wear-resistant Al-Si Alloy Prepared By Spray Deposition
14.	Research On Control Of Large Dimension Tubular Production In Spray Deposition
15.	The Research On The Technics Of Cyclic Pressing In The Densification Of Large-dimension Ring Of Al-20%Si/SiC_p
16.	Study On The Densification Process Of Spray-deposited 5A06 Aluminum Alloy By Wedge Pressing
17.	Microstructure Evolvement And Mechanics Behavior Of High Silicon Aluminum Alloys Prepared By Spray Deposition
18.	Numerical Simulation On Wedge Deformation Of Spray-deposited 5A06 Aluminum Alloy
19.	Study On The Corrosion Resistance Of High Alluminum-zinic Alloy Produced By Spray Deposition
20.	Investigation Of Rolling Process And Microstructure Mechanical Properties Of Multi-layer Spray Deposition Al-8.5Fe-1.3V-1.7Si/SiC_p Composite
<<First <Prev Next> Last>> Jump to