strengthening behavior - Globe Thesis

Keyword [strengthening behavior] Result: 1 - 19 \| Page: 1 of 1
1.	Formation Of Spherical Mg-based Quasicrystal And Its Strengthening Behavior On Magnesium Alloys
2.	Study Of Aging Strengthening Behavior Of Mg-6Zn-(1～2)Cu(-0.5Bi)Alloys
3.	Investigation On The Strengthening Behavior And Mechanism Of Stress-aging Of 7075 Aluminum Alloy
4.	Preparation Of Mg-Zn-Y Quasicrystalline Material And Its Strengthening Behavior On AZ91Magnesium Alloys
5.	Microstructure And High-temperature Deformation Behavior Of TiC Reinforced High-temperature Titanium Alloy Matrix Composites Produced By Melting-casting Process
6.	Study On The In-Situ Synthesis Mechanism And Strengthening Behavior Of Multi-Scale SIC Particles In Al-Si-C Alloys
7.	Synergistic Precipitation Mechanism And Strengthening Behavior Of Nano-Precipitates In 17-4 PH Stainless Steel
8.	Preparation And Strengthening Behavior Of High Strength And Heat Resistance Mg-9Gd-3Nd-1Zn-1Sn-0.5Zr Alloy
9.	The Strengthening Behavior Of The 1Cr9Al1-3Ni1-7WVNbB High Al Ferritic Heat-resistant Steel
10.	Study On Anisotropic Strengthening Behavior Of DC04 Steel Sheet And Evolution Rule Of Subsequent Yield Loci
11.	Study On Annealing Strengthening Behavior And Twin Interaction Of Mg-Nd(Gd)-Zr Alloy
12.	Processing, microstructure evolution and properties of nanoscale aluminum alloys
13.	Preparation And Strengthening Behavior Of (TiC_p+TiB_w)/Ti Composites By In-situ Reaction
14.	Study Of TCB And AlN On The Grain Refinement And Strengthening Behavior Of Hypoeutectic Al-Si-Mg Alloys
15.	Study On Ultra-low Micro-alloying High Strength And Ductility Die Casting Al-Si-Cu Alloy And Its Toughening Mechanism
16.	Study On Deformation And Strengthening Behavior Of C-Si-Mn(C?0.25)-Low Carbon And Low Alloy Duplex Steel
17.	NanoSteel Microstructure Evolution And Strengthening Behavior Investigation
18.	Study On The Microstructure And Precipitation Strengthening Behavior Of 35Ni15Cr Superalloy
19.	Strengthening Behavior On The Surface Of Metals By Single Different Abrasives Via Finite Element Simulation
<<First <Prev Next> Last>> Jump to