Font Size: a A A
Keyword [surfaceroughness]
Result: 1 - 20 | Page: 1 of 2
1. Machining Of Rotating Surface Of B4C Ceramics By Wire Electrical Discharge Machining
2. The Design Of Brief Process Control Level In900mm Temper Mill
3. Fillet Milling Processing And Quality Research Of The Round Copper Bus
4. Study Cutting Parameters And Surface Finish Of Hardened Steel
5. Preparation And Performance Of Si1-xAlxN/Ag/Ta Low-E Films
6. Study On The Impact On Surface Roughness And Mechanism Of Cutter Faliure During The Micro Milling Process
7. Study On New Type Of Cerium Oxide Slurry And Its Polishing Performance
8. Study On Strengthening And Effect Of Properties Of Cylindrical AISI304Austenite Stainless Steel By Ultrasonic Impact Treatment
9. The Research On The Cutting Mechanism Of Free-cutting Steel
10. Analysis Of High-speed Milling Experiment And Prediction Of Machining Stability On Aluminum Silicon Alloy ADC12
11. FEM Analysis And Experimental Research On The Technique Of Ultrasonic Flexural Vibration Assisted Lapping/Polishing Of Hard And Brittle Materials
12. Surface Roughness And Tool Wear In High-speed Turning Inconel718with Ceramic Tools
13. Grinding Experiment Of45Steel、30CrMnSi And Superalloy
14. The Experimental Study On High Speed Grinding Technology In HT300and QT600-3
15. An Experimental Study On A Typical Silicon Nitride Chemical Mechanical Polishing Process
16. Experiment Research On Zirconia Ceramic Bearing Rings And Ceramic Spindle Precision Processing
17. Experimental Study On Grinding Process Of Revolution Surface Of Certain Silicon Nitride Ceramic Typical Part
18. Research On Chemical Mechanical Grinding Tools And Corresponding Properties For K9Optical Glass
19. Experimental Study On Surface Roughness And Cuting Force Of High Speed Cutting TC4Titanium Alloy
20. Research On Cutting The Iron-based Superalloy With The Coated Carbide Tools
  <<First  <Prev  Next>  Last>>  Jump to