Font Size: a A A
Keyword [teeming]
Result: 1 - 20 | Page: 1 of 2
1. Study On The Fluid Flow In A Multi-heat Teeming Tundish For Heavy Steel Ingot
2. Simulation On Improving Of Molten Steel Cleanliness During Multiple-heat Teeming For Heavy Steel Ingot
3. Analysis Of Steel Teeming Effect In New Slide Gate System With Electromagnetic Induction
4. Development And Effect Analysis Of A Novel Electromagnetic Steel-teeming System
5. Generation And Controlling Of Slag Entrapment Caused By Vortex On Teeming Process In Ladle
6. Model Study On The Formation And Suppressing Of Free Surface Vortex During Steel-teeming Process By Water Moder
7. Study On A Novel Steel-teeming Technology With An Electromagnetic Induction System In Ladle
8. Study On Feasibility Of Industrial Application Of Electromagnetic Induction Controlled Automatic Steel-teeming System
9. Study On Formation And Suppression Of Votex In Ladle During Steel Teeming Process
10. Experiment Study On The Behavior Of Inclusion Removal And Drain Sink Control During Ladle Teeming Process With Argon Injected Into Ladle Around The Tapping Hole
11. Mathematical And Physical Simulation Of Transport Behavior During Ladle Teeming Process With Argon Injected Into Ladle Around The Tapping Hole
12. Experimental Study On New Controlling Slag Carry-over Process During Continuous Casting Ladle Teeming Process With Gas Injected Into Ladle Around The Tapping Hole
13. Mathematical Simulation Of Slag/Steel Interface And Heat Transport Behavior During Teeming Process With Argon Injected Into Ladle Around The Tapping Hole
14. Preparation And Heating Effect Analysis Of The Coil In Electromagnetic Steel-teeming System
15. Numerical Simulation On Inclusion Removal Behaviors During Ladle Teeming With The New Process Of Argon Blowing Around The Tapping Hole
16. Water Model Experimental Research On Effect Of Swirl Blade On Flow Pattern And Bubble Behavior In Up-hill Teeming Process
17. Visualized Study Of Bubble Behavior In The Swirling Flow Uphill Teeming Process
18. Simulation Study On Vortex Behavior In Double Nozzles Ladle During Teeming Process
19. Thermal Analysis And Insulation Methods Of Coil In The Electromagnetic Induction Controlled Automated Steel Teeming System
20. Design Of Electromagnetic Slag Carry-Over Detection System During Ladle Teeming Process
  <<First  <Prev  Next>  Last>>  Jump to