Font Size: a A A
Keyword [temperature holding time]
Result: 1 - 20 | Page: 1 of 2
1. The Study Of Joint Brazed With Ni-P Interlay And Its Diffusing Behaviour For A Stainless Steel
2. The Study Of Microstructure Heredity Of ZAlSi7MgY Alloy
3. A Research For New Process Of Cuprobraze For Indoor Steel Radiator Of Combined Type Section Tube
4. Influence Of Calcined System On The Coal Gangue Structural And Properties
5. Study Of Alumina Ceramic And Its Acid Corrosion Resistance
6. Effect Of Mg-Ca Alloy On Removal Lead From Lead-brass
7. Research On The Preparing Process Of Low-Ti Al-Ti-B Master Alloys For The Casting Alloys
8. The Preparation Techniques And Performance Research Of VC/Fe Composite
9. Study On Process And Properties Of17Ni/（NiFe2O4-10NiO） Cermet Fabricated By Hot-pressing Sintering
10. Analysising The Microstructure And Properties Of Dissimilar Weld Joints Between Q245R And SUS304Filled With Ni Wire
11. Effects Of Heat Treatment On Duck Meat Tenderness And Its Mechanism
12. Effect Of Initial Deformation Energy Storage, Heating Rate And Holding Time On Microstructure And Property Of Super-high Strength Al-10.78Zn-2.78Mg-2.59Cu-0.221Zr-0.047Sr Alloy
13. Experiment Al Research On Hot Forming Key Process Parameters Of Ultrahigh Strength Steel B1500HS
14. Research On Catalytic Etching Of Synthetic Diamond By Iron Group Metals
15. Research On The Process And Properties Of Alumina Ceramic And TC4 Brazed Joint
16. The Researchment Of Iron-based Brazing Filler Metals And The Joint Performance For Brazing Stainless Steel EGR Oil Cooler In Vacuum
17. Research On Etching Of Synthetic Diamond By Iron And Cobalt Salts
18. Research On The Preparation And Properties Of Low-density High-strength Ceramic Proppants
19. Preparation,Analyses Of Structures And Optical Properties Of Ce-Doped Yttrium Aluminum Garnet Fluorescent Materials
20. Study On Foaming Corrosion And Application Of Diamond By Iron-based Alloy Powder
  <<First  <Prev  Next>  Last>>  Jump to