thickness distribution - Globe Thesis

Keyword [thickness distribution] Result: 21 - 40 \| Page: 2 of 3
21.	A Modified CFD-based Sand Erosion Prediction Procedure For Pipe Elbows And Similarity Analyses On Erosion Tests
22.	Study On Forming Properties Of Pressurized Sheet Assisted By Magnetic Medium Under Different Loading Modes
23.	The Equal Strength Formula Design Of 180 Degree Tube Wall Thickness And Optimization Of Process Parameters Of Hot Forming Horn Mandrel
24.	Effect Of Pre-bulging On Deformation Process Of Single Point Incremental Forming Sheet
25.	The Thickness Control Mechanism Of Extrusion Blow Molding
26.	The Impact Of Thickness Distribution On Dielectric Properties Of Nano-Hybrid Three-Layer Composites PI Films
27.	Investigation Of Thickness Distribution Of The Passivation Film On Tinplate Surface And Study On The Film Composition And Performances
28.	Surface Topology Evolution Of Monolayer Brazed Superabrasive Wheels And Undeformed Chip Thickness Distribution
29.	Thickness Distribution And Control Method Of Incremental Sheet Forming
30.	Research On Axial Hydro-forging Of 6063 Aluminum Alloy Tube With Variable-diameter
31.	Research On Pressure Distribution Characteristics Of Sheet Metal Viscous Pressure Forming
32.	Research On Hydroforming Of 1Cr18Ni9Ti Stainless Steel Deep Cavity Parts With Half Closed Spherical Geometry
33.	Research On The Influencing Factors Of Precision In Preparation Of Flexible Polymer Film By Spin Coating
34.	Study On The Influence Factors Of Hydroforming Of Y-shaped Tube And Thickness Distribution Optimization
35.	Numerical Simulation And Experimental Study On Film Formation Mechanism And Film Thickness Distribution Of Electrostatic Air Spray
36.	Numerical And Experimental Investigations On Springback And Geometrical Profile Of ISF
37.	Research On The Method Of Double Side Incremental Forming And The Strategy Of Tools' Cooperative Motion
38.	Molding Technology And Thickness Distribution Optimization For Injection Molding Of Short Fiber Reinforced Plastic Product
39.	PET Bottle Biaxial Stretch Blow Molding Technology
40.	Experimental And Numerical Research On Gas Blow Forming Technology For Magnesium/Aluminum Composite Stepped Tube
<<First <Prev Next> Last>> Jump to