thickness ratio - Globe Thesis

Keyword [thickness ratio] Result: 21 - 40 \| Page: 2 of 3
21.	Initial Thickness Ratio Design And Research On Hot Rolling Forming Of 316L/EH40 Clad Plate
22.	Study On Ultra-precision Machining Of Copper Sheet With High Radius-thickness Ratio
23.	Study On Ground Deformation Law In Changping Mining Area
24.	Research On Side Rolling Symmetrical Thickening Forming Of 2219 Aluminum Alloy Sheets
25.	Study On Ldhs Modification And Composite Materials For Thermal Stability Of PVC
26.	Numerical Simulation Of Layered Roadway Floor Burst Under Impact Loads
27.	Effect Of The Blade Thickening And Twisting Law On The Performance Of Helical Axial Multiphase Pump
28.	Research On Numerical Simulation Of Extrusion Process Of Aluminum Profile With Large Cross-section And High Wall Thickness Ratio
29.	Research On Flexible Forming System And Process Of Metal Pipe
30.	Research On Deformation Mechanism Of The Cold Rolling Strip With Different Width-thickness Ratio
31.	Research On Design And Casting Process Of Die Steel Ingot
32.	Study On Hot Pressing Technology And Experimental Of Stainless Steel/Carbon Steel With Different Thickness Ratio
33.	Measurement Method Of Aspect Ratio Of Kaolintie And Simulation Of Mechanical Model Of Kaolinite In Laminar Flow Regime Of Newtonian Liquid
34.	Research On Preparation And Performance Optimization Of Metal Composite AZO-based Multilayer Transparent Conductive Thin Films
35.	Study On Overburden Strata Failure Mechanics And Water Inrush Risk Of Mining Coal Seam Under Thin Bedrock
36.	Research On Compatible Deformation And Transverse Bonding Performance Of Cold-rolled Cu/Al Clad Strip
37.	Study On High Speed Impact Damage Mechanism Of TiN/Ti Multilayer Coating
38.	Research On Press-bending With Internal Pressure Of Thin-walled Unsymmetrical 5083 Aluminium Alloy Tubal Component With Large Diameter Thickness Ratio
39.	Research On High-temperature And Friction Properties Of Prepared Multilayer TiAlN/AlCrSiN Tool Coatings
40.	Study On Four-roller Roll Forming Process Of Bimetal Cladded Plates
<<First <Prev Next> Last>> Jump to