ultra high speed - Globe Thesis

Keyword [ultra high speed] Result: 81 - 97 \| Page: 5 of 5
81.	The Perormance Test System Of Ultra-high Speed Grinding Electric Spindle
82.	Research On The Optimization Design Of Ultra-high Speed And Low Energy Consumption Spindles And The Mechanism Of Vibration And Noise Reduction
83.	Vibrations of micro-scale cutting-tools and ultra-high-speed-spindles---modeling and experimentation
84.	Mandrel-based Polishing of Single-Crystal Diamond and Ceramics for Fabrication of Micro-endmills: Analysis of the Polishing Characteristics and the Error Motions of Ultra-High-Speed Micromachining Spindles
85.	Three Dimensional Dynamics of Micro Tools and Miniature Ultra-High-Speed Spindles
86.	Controllable Preparation Method And Polymerization Process Of Latex In Ultra High Environment
87.	Research On Digital Design And Simulation Analysis Of Ultra-High-Speed Grinding Test-bed
88.	ALE Simulation Of Ultra-high Speed Metal Jet Penetration Into High Strength Concrete Target
89.	Study On The Mechanism Of Ultra-High Speed Jet Penetrating Through Perforating Gun,Casing And Sandstone
90.	Study On Impact Resistance Of Composite Materials Under Low-speed And Ultra-high-speed Impact
91.	Microstructure And Properties Of Ultra-high-speed Laser Cladding Of Cobalt-based High-tempe0ure Wear-resistant Coating On The Surface Of Cast Roll Sleeve
92.	Research On Wear Resistance And Corrosion Resistance Of Fe-based Alloy Coating Deposited By Ultra-high-speed Laser Cladding
93.	Structural Optimization Design And Dynamic Characteristic Analysis Of Super-high Speed Static Pressure Air Floating Electric Spindle
94.	Research On M2 Coating Prepared By Ultra-High Speed Laser Cladding
95.	Study On Metallurgical Characteristics And Properties Of Ultra-high Speed Laser Cladding On Fe And Ni Base Coatings
96.	Experimental And Simulation Research On Ultra-High Speed Grinding Of Nickel-Based Superalloys Based On Single Abrasive Grain
97.	Analysis Of Vibration Characteristics Of Ultra-high Speed Grinding Electric Spindle Under The Action Of Magneto-thermal
<<First <Prev Next> Last>> Jump to