Font Size:
a
A
A
Keyword [working properties]
Result: 1 - 15 | Page: 1 of 1
1.
Study Of Hot-working Properties And Warm Deep Drawing Processing Of Twin-roll-cast AZ31 Magnesium Alloys Sheets
2.
Basic Research In Best Coupling State Between Material And Working Properties Of Forging Dies
3.
Research And Application Of High Alumina Bauxite Based-spinel Castable For Ladles
4.
The Design And Optimization Of Straight-GMM Transducer Used In Vibration Welding
5.
Fabrication And Performance Evaluation Of The Cu-based Pre-brazed Diamond Saw Blade
6.
A Comparative Study On The Numerical Simulation And Working Properties Of Two Line Types Three-Thread Single-Screw Pump
7.
Effect Of Rare-Earth Element Cerium On The Microstructure And Hot-Working Properties Of Super Duplex Stainless Steel
8.
Study On Hot Deformation Behavior Of New Austenitic Heat Resistant Steel For Ultra-supercritical Thermal Power
9.
Study On The Physical And Mechanical Properties Of Alkali Activated Slag-fly Ash Gel
10.
Experimental Study On Properties And Micromechanism Of Modified Rubber Aggregate Cement-based Materials
11.
Study On The Influence Of Ultrafine Limestone Powder On The Properties Of Self-compacting Concrete
12.
Study On Preparation And Properties Of Precast Hollow Wall Panels With Ceramsite Concrete
13.
Workability And Mechanical Properties Of Talcum Powder Self-compacting Concrete
14.
Experimental Study On Durability And Composite Modification Of Magnesium Phosphate Cement Mortar
15.
Study On The Influence Of Graphene Sheet Diameter On The Mechanical Properties Of Cementitious Materials
<<First
<Prev Next>
Last>>
Jump to
