Font Size:
a
A
A
Keyword [POLYFLOW]
Result: 21 - 40 | Page: 2 of 4
21.
Stress And Deformation Analysis Of Residual Oil Droplets In The Micro Pores
22.
Study On Precison Filtration Of Acrylic Spinning Solution
23.
Research On The Impact Of Injection Parameters To The Energy Consumption Of The Injection Molding Machine
24.
Gas-assisted Polymer Extrusion Process And Numerical Simulation
25.
Study Of Melt Flow In The Composite Spinning Components And Numerical Simulation Of Fiber Forming Process
26.
Numerical Calculation Of Unsteady Flow Of Viscoelastic Fluid In The Eccentric Annulus
27.
Research And Application On TRI-Component Composite Fibers
28.
Study Of Flow Field In Hot Cutting Pelletizing Die
29.
Research On Key Technology Of Making High-performance PAN Carbon Fiber Precursors Based On Melt Spinning
30.
The Design And Simulation For Four Plunger Extrusion Of UHMWPE
31.
Experiments And Study Of Generalized Viscosity Of Polymer Melts
32.
Simulation Of Flow Field In Adapter Between Twin-Screw Extruder And The Die
33.
The Research Of The Flow In The Internal Mixer Using Simulation Method
34.
Numerical Simulation Study On The Process Of Electrospinning And Experimental Verification
35.
Study Of New Structure Of Plastic Ampoules And Its Molding Method
36.
Research On New Process Of Combination Of Local Vacuum Forming And Extrusion Blow Molding
37.
Design And Numerical Simulation Application Of Rubber Injection Mold With Cold Runner
38.
Study On Rheological Properties Of Abrasive Media In Abrasive Flow Machining
39.
Analysis Of Draw Flow Field And Deformation Control During Extrusion Of Polymer Catheter
40.
Numerical Simulation On The Extrusion Process Of Propellant Based On POLYFLOW
<<First
<Prev
Next>
Last>>
Jump to
