Wall Slip - Globe Thesis

Keyword [Wall Slip] Result: 21 - 40 \| Page: 2 of 3
21.	Research On Cutting Mechanism And Processing Technology Of Abrasive Flow Machining
22.	The Influence Of Injection Speed On The Filling Stage Of Micro-injection Molding And Morphology Of The Parts
23.	Numerical Simulation And Experimental Study Of Shape Change In Polymer Micro-extrusion
24.	Research On Wall Slip Of Polymer Melt In Spinning Process
25.	Theoretical And Experimental Study On Injection Molding Of Fiber Reinforced Polymer Composites
26.	Flow Mechanism And Experimental Study On Vibration Extrusion And Injection Of Rubber
27.	The Rheological Properties Of Polypropylene/Carbon-Based Nanocomposites In Microscale Channels
28.	Research On The Wall Slip Of SIS And The Viscoelastic Properties Of Its Composities
29.	Study On Inner Wall Wettability And Flow Property In Liquid Pipe
30.	Research On MR Micro-mechanism And Wall Slip Characteristics
31.	Numerical Simulation Of Propellant In Channel Considering Wall Slip
32.	Influence Of Material Viscoelasticity And Wall-slip On EHL Of Rubber Journal Bearings
33.	Utra-Smooth Polishing Of Si Modification Layer On SiC Surface With Viscoelastic Fluid
34.	Research On Wall Slip Characteristics Of Magnetorheological Fluid Under Rotating Shear
35.	The Study Of Extrusion Simulation And Wall Slip Of TPU Film
36.	Processability and instabilities of polyolefin-organoclay nanocomposites in a single screw extruder
37.	The occurrence of flow marks during injection molding of linear polyethylene
38.	The effect of processing additives on the wall slip of molten polyethylene
39.	Study On Dynamic Wetting Behavior And Tribological Property Of Bioinspired Rubber Surface With Microtextured And Wettablity Gradient
40.	Research On Coal Wall Slip Spalling And Its Stability Control In Fully Mechanized Face With Large Mining Height
<<First <Prev Next> Last>> Jump to