Font Size: a A A
Keyword [copper-matrix]
Result: 21 - 40 | Page: 2 of 10
21. Study On The Friction And Wear Properties Of Copper-Matrix Anti-friction Composites Under Different Temperatures
22. Study On Preparation Of Copper Matrix Composites Enhanced By Molybdenum Silicide And Friction And Wear Properties
23. Fabrication And Properties Of In Situ Copper Matrix Composite Reinforced By TiB2
24. Manufacture And Properties Of Nanodiamond/Cu Composites By Powder Metallurgy
25. Nanodiamond/Copper Composites Fabricated By Chemical Co-Deposition Metallurgy
26. Fabrication And Properties Of A ZnO Reinforced Cu-Matrix Composite
27. Cu-Cr Mechanical Alloying And Microstructures And Propertiesof C/(Cu-Cr) Composites
28. A Research On The Synthesizing Process And Mechanical Properties Of Nano-Particulate-Reinforced Copper Matrix Composites
29. Study On The Fabrication And Wear Properties Of Copper Matrix Composite Reinforced By In-situ Al2O3 Particle
30. Fabrication And Properties Research Of Carbon Nannotubes-Cu Composite With Interpenetrating Networks
31. Development Of High-Strength And High-Conductivity Copper Matrix Composite Reinforced With TiB2 Particles
32. Research Of Csf/Cu Composite Prepared By Powder Metallurgy And Its Properties
33. Preparation And Tribological Properties Of Copper Matrix Composites With NbSe2 Self-lubricating Materials
34. Study On Copper-matrix Composite Friction Materials With MA And PM
35. A Study Of The Metal Cladding Onto Short Carbon Fibers And Properties Of The Copper Matrix Composites Reinforced With
36. Preparation And Wear Behavior Of Cu-La2O 3 Composites
37. Fabrication And Properties Of Copper Matrix Composite Reinforced By Cu-Coated Graphite And Nano-SiCp
38. Study On Preparation And Tribological Properties Of Copper Matrix With SiC And Carbon Onions Self-lubricating Composites
39. Study On Preparation Technology And Electrical Properties Of Carbon Nanotubes Reinforced Copper Matrix Composites
40. Preparation Of Carbon Nanotubes Reinforced Copper Matrix Composites By Ultrasonic Welding
  <<First  <Prev  Next>  Last>>  Jump to