Font Size:
a
A
A
Keyword [roll]
Result: 21 - 40 | Page: 2 of 10
21.
Study Of High-Speed Precise Forming With Cold Roll-Beating Technique
22.
Study On The New-type Be-Cu Material Roller And Its Applied Performances For The High Speed Twin-roll Casting Of Aluminum Alloys
23.
Physical-geometrical Coupling Rule And Design Of Fluid Field Of Aluminum Melt Of Continuous Roll Casting
24.
Research On Intelligent Control System Of Numerical Control Roll Grinder Based On Knowledge
25.
The Research On The Mechanism And Control Method Of Multi-wire Sawing
26.
Study On The Structure & Properties Of Alloyed Steel Roll After Laser Melting
27.
Research On Microstructure And Subsequent Treatment Of High Speed Steel Cast-strip Produced By Twin-Roll Strip Casting
28.
Mechanism On The Vacuum Hot Rolling-Deformation Bonding Of Titanium Alloy And Stainless Steel
29.
Investigation On Deformation Technology, Microstructure And Mechanical Properties Of Twin Roll Cast Magnesium Alloy
30.
Simulation Of The Tube Roll-Cutting Process And Key Equipment Design
31.
Research On Key Technique Of Cold Strip Temper Rolling Mill
32.
Research On Flatness Forecasting Model And Generialize Pridictive Control Algorithm For Cold Mill
33.
Study On Numerical Simulation And Networked Design Of Cold Roll Forming Process
34.
Research On Multi-point Roll Forming For 3-D Surface Of Sheet Metal
35.
Study Of Five-degree-of-freedom Simultaneous Measurement Method Based On Common-path Compensation For Beam Drift
36.
Characteristics Of Porous Media Combustor With External Swiss-roll
37.
Research On Stress Relief Mechanism By Peening Roll After Surfacing Welding And Welding With Trailing Peening System
38.
Reasearch On Production Mechanism And Test Of Chatter Mark On Roller Surface For Cold-roll Temper Rolling Mill
39.
Simulation And Experimental Study On Residual Stresses For Multi-Stand Roll-Formed Sections
40.
Study On Roll Eccentricity Control For Flat Rolling Mill
<<First
<Prev
Next>
Last>>
Jump to
