Font Size: a A A
Keyword [shear band]
Result: 21 - 40 | Page: 2 of 8
21. Research On Mechanism Of Shear Band Formation Of AZ31Mg Alloy
22. Crystallographic Textures In Rolled And Recrystallized Fe81Ga19 Sheet
23. Research On Dynamic Response Of Meta-stable βTi-5553Alloy Under Shock Wave Loading
24. Study On The Influence Of Heat Treatment Process On The Microstructure And The Static And Dynamic Mechanical Properties Of Aermet100Steel
25. The Fabrication Of Zrcu-based Bulk Metallic Glasses Reinforced By Ductile Crystallines And The Study Of Compressive Properties In Room Temperature
26. .T2/QBe <sub> 2 </ Sub> Explosive Compound Interface Layer Within The Deformation Characteristics
27. Non-explosive Compound Interface (nanometer) Crystal And Organizations Within The Asb Formation Mechanism
28. Study Of Dynamic Fracture Of Two Structural Steel
29. Projectile Impact Of Steel In The Process Of Adiabatic Shear Behavior
30. Two Dynamic Loading Conditions On The Shear Zone Of 7075 Aluminum Alloy, The Impact Of Self-organization And Injury
31. Rolling Plastic Deformation Of Zr-based Amorphous Alloy Mechanical Properties
32. Investigation On Mechanical Properties And Localized Deformation Behavior Of Ultrafine Grained Ti-6Al-4V Alloy Prepared By Powder Metallurgy
33. The Evolution Of Density And Distribution Of Shear Bands In Zr61.7Al8Ni13Cu17Sn0.3 Bulk Metallic Glass After Compression Deformation
34. Effect Of Surface Microstructure And Mechanical Property By Laser Remelting In Bulk Metallic Glass
35. Element Simulation And Experimental Study Of The Sawtooth Chips In High Speed Cutting
36. The Study On Effect Of Stress State To Shear Banding Behaviors In Bulk Metallic Glasses
37. A Study Of Shear Band Propagation Through Metallic Glasses Interface By MD Simulations
38. Formation Mechanism And Characterization Of Serrated Chip In High Speed Machining
39. Interaction Of Adiabatic Shear Bands And Its Effect On Anti-multiple-hit Property In Ti-6Al-4V Alloy
40. Research On The Mechanism For High Speed Machining Of Metals
  <<First  <Prev  Next>  Last>>  Jump to