Font Size:
a
A
A
Keyword [AASHTO]
Result: 21 - 40 | Page: 2 of 4
21.
Footing Fixity of Bridge Pier with End-Bearing Pile Foundatio
22.
An evaluation of the effects of various design parameters on the air voids of asphalt concrete specimens
23.
High performance steel bridge girders: Performance and design
24.
Strut-and-tie modeling for disturbed regions in structural concrete members with emphasis on deep beams
25.
An evaluation of the strength characteristics of horizontally curved steel I-girder bridges
26.
Development of live load distribution factor equations for girder bridges
27.
Analysis of the AASHTO fatigue design provisions for welded steel bridge details using reliability theory
28.
Evaluation of the service II limit state for AASHTO elastic and moment redistribution procedures
29.
Cracking studies of high-performance concrete for bridge decks
30.
Development of a new test procedure to evaluate the moisture susceptibility of hot mix asphalt
31.
Empirical deck for phased construction and widening
32.
Comparison between AASHTO T 283 test and Hamburg Wheel Track test methods to determine moisture sensitivity of hot mix asphalt (HMA)
33.
Live-load test and finite-element model analysis of an integral abutment concrete girder bridge
34.
Shear force distribution in steel bridge girders
35.
Investigation of moisture sensitivity of hot mix asphalt concrete
36.
Performance of AASHTO girder bridges under blast loading
37.
Evaluation of the Aggplus(TM) system and the SSDetect system against the current AASHTO T-84 and T-85
38.
Effect of increasing truck weight on bridges
39.
Evaluation of methods for measuring aggregate specific gravity
40.
Seismic retrofit designs for existing highway bridges built before 1992
<<First
<Prev
Next>
Last>>
Jump to
