Atomization characteristics - Globe Thesis

Keyword [Atomization characteristics] Result: 41 - 60 \| Page: 3 of 4
41.	Studies On Atomization Characteristics Of Dual-Orifice Pressure-Swirl Atomizer
42.	Numerical Simulation Of Flow And Atomization Characteristics Of Diesel Engine Variable Section Injector
43.	The Research Of Atomization Inhalation System Based On Electrospray
44.	The Numerical Simulation Of Internal Flow And Atomization Characteristics With High Injection Pressure For GDI Nozzle And Parameter Optimization
45.	Research On Rotating Core Structure Of High Pressure Water Mist Nozzle And Its Tests Of Fire Suppression
46.	Study On Characteristics Of Self-rotating Spray With Pre-mixed Compressed Air And Water For Extinguishing Fires
47.	Experimental Study On Spray Characteristics Of Atomizing Fan Nozzle For Afterburner
48.	Research On Atomization Characteristics In High Speed And Low Pressure Flow
49.	Pressure Spray Nozzle Atomization Characteristics Of Experimental Study And Numerical Simulation
50.	Characteristics Analysis And Optimization Of Atomized Inhalation Electrospray Nozzle
51.	Research On Atomization Characteristics Of Liquid Pulsed Jet In Supersonic Crossflow
52.	Study On The Breakup Breakup Mechanism And Atomization Characteristics Of Fuel Jet In High Pressure Heating Environment
53.	Investigation On The Flow And Atomization Characteristics Of Centrifugal Nozzle Under Physical Parameters
54.	Prediction of biodiesel fuel atomization characteristics based on measured properties
55.	Research On Cavitation Erosion Of High-Pressure Common Rail Fuel Nozzle And Corresponding Jet Atomization Characteristics
56.	Effects Of The Head Structural Parameters On The Flow Field And Atomization Characteristics Of The Marine Gas Turbine Combustor
57.	Study On Atomization Characteristics And Effectiveness Of Two-phase Flow Atomizing Nozzle
58.	The Influence Of Nozzle Group Droplet Atomization Characteristics On Enhanced Heat Transfer
59.	Research Of Flow And Atomization Characteristics Of Swirl Nozzle Under Different Injection Conditions
60.	Simulation Study On Flow Characteristics And Atomization Characteristics Of Standard Fuel No.1 In Aviation Nozzle Based On FLUENT
<<First <Prev Next> Last>> Jump to