Blade tip timing - Globe Thesis

Keyword [Blade tip timing] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Fault Diagnosis Of Rotating Machinery Rotor With Blade Tip-timing Data
2.	Rotating Blade Vibration Detection And Parameters Identification Technique Using Blade Tip-Timing
3.	Investigation On Vibration Parameters Identification Method Of Rotating Blade Vibration
4.	Rotating Blade Tip Clearance Measuring Technique Using Blade Tip-timing And Dual-frequency Laser Phase Ranging
5.	Blade Tip-timing Measurement System And Simulation Research
6.	Parameters Identification Of Inter-Blade-Coupling Vibration Based On Blade Tip Timing
7.	Rotational Mismatch Blade-Roulette Non-Contact Measurement And Analysis Of The Structure Vibration
8.	Noise Processing Techniques For Vibration Signals Of Rotating Blade
9.	Identification Of Blade Vibration Parameters Based On Blade Tip Timing And Study On Coupled Vibration
10.	Investigation On Rotating Blade Vibration Monitoring And Analysis Method
11.	Rotating Blade Vibration Monitoring Test And Parameters Identification
12.	Investigation On Method Of Turbine Blade Vibration Measurement Based On Data Fusion Method
13.	Research On Non-contact Safety Monitoring And Intelligent Diagnosis Of High-speed Blades Based On Blade Tip-timing Method
14.	Research On Key Technology Of Crack Detection In Rotating Blades By Non-contact On-line Blade Tip-timing Method
15.	Research On Blade Tip Clearance And Blade Tip-timing Measurement Based On Microwave Sense
16.	Research On On-line Condition Monitoring And Fault Warning Methods For Centrifugal Compressor Blade
17.	Simulation And Experimental Research On Non-Contact Measurement Of Mistuned Blades Vibration
18.	Research On Identification For Vibration Parameters Of Rotating Blades Using Blade Tip Timing Without The Once-per Revolution Sensor
19.	Under-sampled Vibration Signal Reconstruction For Blade Tip-timing At Non-constant Rotation Speeds
20.	Sparse Reconstruction Of Multi-frequency Blade Vibration Spectrum By Blade Tip Timing Measurement
<<First <Prev Next> Last>> Jump to