Cold-formed steel - Globe Thesis

Keyword [Cold-formed steel] Result: 21 - 40 \| Page: 2 of 10
21.	Mechanical Principle In Crossing Web Member Of Cold-formed Steel Triangular Transmission Towers
22.	Research On Simplified Method Of Calculation For Shear Resistance Of Cold-formed Steel Stud Composed Wall
23.	Research On The Horizontal Shear-bond Properties Of Lightweight Aggregate Composite Slabs
24.	The Design And Researching On Cold-formed Steel Portal Frame With Inclined Braces
25.	Experimental And Theoretical Study Of Elastic Critical Local Buckling Stress Of The Cold-formed Steel Bending Members
26.	Experimental Study And Direct Strength Method Design Of 550MPa High Strength Cold-Formed Steel Continuous Hat Section Purlins
27.	Direct Strength Method Study On High Strength Cold-Formed Steel Squared Axial Compression Columns With Stiffened Elements
28.	Experimental And Theoretical Study On Distortional Buckling Of High Strength Cold-formed Steel Lipped Channel Columns Under Axial Compression
29.	Experimental And Theoretical Study On Bending Bearing Behavior Of 550MPa High Strength Cold-Formed Steel Purlins
30.	Test And Finite Element Nonlinear Analysis Of 550MPa Axial Compression Members Of High Strength Cold-Formed Steel
31.	Structural Behaviour Of Moment Conections Between Cold Formed Steel Beam-columns
32.	The Investigation On Cold-Formed Thin-Walled Steel Beam-Column Joints Of Connections With Bolt-Plate
33.	The Research On Mechanics Properities Of Steel Bamboo Composite Slabs
34.	Contrast And Research Of Cold-Formed Steel Structures Standards
35.	Experimental Study And FEM Analysis On Shear Resistance Of High Strength Cold-Formed Steel Framing Walls With Double Boards
36.	Experimental And Design Method Study On Cold-formed Channel Steel Columns With Section Thickness Less Than 2mm Under Axial Compression
37.	Research On Stiffness Of Joints In Bolted Connected Cold-formed Steel Trusses
38.	Study On Shear Performance Of High Strength Cold-Formed Thin-Walled Steel Framing Walls With Cross-Bracing
39.	Experimental Study And Theoretical Analysis On Load Carrying Apacity Of Cold-Formed Flexural Members With Thicknesses Less Than 2mm
40.	Experimental Study On High Strength Cold-Formed Steel Wall Studs With Wallboard On Both Sides Under Axial Compression
<<First <Prev Next> Last>> Jump to