Font Size: a A A
Keyword [Concentration factor]
Result: 81 - 100 | Page: 5 of 6
81. Study On High Cycle Fatigue Behavior Of T-shaped Circular Steel Pipe Joints Under Marine And Atmospheric Environment
82. Research On Key Design Parameters Of Interlocking Hydraulic Cylinder Locking
83. Fatigue Life Prediction Research Of Load Bearing Structure Based On Cumulative Damage Model Considering Strength Degradation
84. Generalized Mixed Finite Element Method For Stress Concentration Around A Circle Hole In Composite Structure
85. Study On Hot Spot Stress Concentration Factor Of Welded Concrete-Filled Stell Tubular Truss Joints
86. Study On The Influence Of Geometric Parameters Of Tubular Joints On Fatigue Life Of Offshore Turbine Foundation Structure
87. Optimization Of The Photovoltaic-thermoelectric Hybrid System With And Without Optical Concentrator
88. Study On Ultimate Load Of Plates With Sharp Notches
89. Investigation of a stress concentration factor for analytical stress based failure criterion
90. Evaluation of thermophysical properties, friction factor, and heat transfer of alumina nanofluid flow in tubes
91. Stress concentration factor in plates with permanent plastic deformation
92. The effect of joint parameters on rock block size and key block size distributions
93. Investigation on Effective Modulus and Stress Concentration Factor of 3D Reinforced Composite by Finite Element Analysis Metho
94. Scattering Of SH Wave By Debonded Inclusions And Linings In The Covering Layer
95. Study On Soil Arching Effect And Load Reduction Characteristics Of High Fill Soil-Rock Mixture Embankment Culvert
96. Experimental And Theoretical Study Of Dynamic Performance Of Concrete-Filled Steel Tubular T-Joints
97. Study On Hot Spot Stress Of Concrete-Filled Steel Tubular T-Joints And Y-Joints
98. Scattering Of SH-wave By A Cylindrical Inclusion Near The Interface In Half-space And Right-angle Domain Piezomagnetic Media
99. Study On Structural Strength And Fatigue Performance Of Typical Aircraft Lugs
100. The Effect Of Pitting Corrosion On Fatigue Performance Of Riveted Components Under Residual Stress Of Hot Riveting
  <<First  <Prev  Next>  Last>>  Jump to