Font Size: a A A
Keyword [Derived]
Result: 181 - 200 | Page: 10 of 10
181. Lateral-Torsional Buckling Instability Caused by Individuals Walking on Wood Composite I-Joists
182. Properties of concrete with tire derived aggregate and crumb rubber as a lighthweight substitute for mineral aggregates in the concrete mix
183. Quantifying the effects of spatially-distributed roughness parameters derived from Airborne Light Detection and Ranging (LiDAR) on a 2D hydrodynamic model of the Lower Yuba River, CA
184. Assessing the Accuracy of GIS-Derived Stream Length and Slope Estimates
185. Efficiency and Emissions Study of a Residential Micro-Cogeneration System Based on a Modified Stirling Engine and Fuelled by A Wood Derived Fast Pyrolysis Liquid-Ethanol Blend
186. Tin oxide based composites derived using electrostatic spray deposition technique as anodes for lithium-ion batteries
187. Dispersion relations for elastic waves in plates and rods
188. Location of sinkhole confining breach using groundwater flow patterns derived from cone penetration testing
189. Interrater reliability and scoring accuracy of the Rorschach comprehensive system: Comparing students and experts at the variable, response, protocol, and interpretation level
190. Anion Exchange Membranes Derived from Nafion Precursor for the Alkaline Fuel Cell
191. Flyboost derived single stage power factor correction converter
192. Reduced Pressure Distillation of Wood Derived Pyrolysis Liquid Biofuels and their Emulsion with Diesel Fuel in a Compression Ignition, Indirect Injection Engine
193. Evaluating the material properties of building derived aggregate using laboratory testing methods
194. Biologically Derived Diesel Fuel and Nitrogen Monoxide Formation: An Experimental and Chemical Kinetic Modeling Study
195. Derived direct summands
196. New techniques in PWM and resonant converters
197. Exact feedback linearization with state derivative feedback for high-performance field-oriented induction motor speed/position control
198. Analysis of in situ test derived soil properties with traditional and finite element methods
199. Output sensitivity of MLPs derived from statistical expectation
200. Analysis and control of three phase AC-DC PWM boost-buck and buck-boost bidirectional power converters
  <<First  <Prev  Next>  Last>>  Jump to