Direct-injection spark-ignition - Globe Thesis

Keyword [Direct-injection spark-ignition] Result: 1 - 20 \| Page: 1 of 2
1.	The Research On Electronic Controlled Injection System And Closed-loop Control Algorithm Of Direct Injection Spark Ignition Engine
2.	Investigation On Emission Characteristics Of Direct Injection Spark-Ignition Methanol Engine
3.	Effect Of Fuel Additive On Unregulated Emissions From A Direct Injection Methanol Engine
4.	Combustion And Emission Characteristics Of A Direct Injection Spark Ignition Engine With Exhaust Gas Recirculation
5.	Experimental Study On Cold-Start Of Direct Injection Spark-Ignition Methanol Engine
6.	Simulation Research On Combustion And Emission Of Direct Injection Spark-Ignition Methanol Engine
7.	Simulation Research On Unregulated Emissions Of Direct Injection Spark-ignition Methanol Engine
8.	An Experimental Study On Turbocharged Direct Injection Engine With Butanol-Gasoline Blend Fuels
9.	Combustion And Emission Characteristics Of A Direct Injection Spark Ignition Engine With Exhaust Gas Recirculation (EGR) And Alcohols
10.	The Experimental Research On Low-speed Pre-ignition In Boosted Direct Injection Spark Ignition Engine
11.	Effects Of Iso-butanol On Direct Injection Spark Ignition Engine Combustion And Emission With Exhaust Gas Recirculation
12.	Mechanism And Suppression Of Low-speed Pre-ignition In Trubocharged Direct-Injection Spark-ignition Engines
13.	Research On The Influence Of EDI+GPI Ignition Engine Knocking
14.	Optimization Research Of Cold Start For Aviation Heavy Fuel Direct Injection Spark-ignition Type Engines
15.	Investigation On The Effects Of Exhaust Gas Recirculation On The Combustion And Emission Characteristics For Direct Injection Spark Ignition Engines
16.	Numerical simulation of a direct injection spark ignition engine using ethanol as fuel
17.	Spray characterization in a direct injection spark ignition engine during cold start
18.	Analysis of the fuel economy potential of a direct injection spark ignition engine and a CVT in an HEV and a conventional vehicle based on in-situ measurements
19.	Fuel film temperature and thickness measurements on the piston crown of a direct-injection spark-ignition engine
20.	Characterization of combustion and heat transfer in a direct injection spark ignition engine through measurements of instantaneous combustion chamber surface temperature
<<First <Prev Next> Last>> Jump to