Enhancement heat transfer - Globe Thesis

Keyword [Enhancement heat transfer] Result: 1 - 20 \| Page: 1 of 1
1.	Study On Characteristics And Enhancement Heat Transfer For High Temperature Heat Pipe Fin
2.	Heat Transfer Enhancement Mechanism And Fouling Development Outside Vibrating Pipe
3.	Numerical And Experimental Study Of The Heat Transfer Enhancement In Turbulent Channel Flow
4.	The Study On Enhancement Heat Transfer Of Double Side Condensation On Vertical Tube Outside And Application In The Low Pressure Heater Of Power Station
5.	Research On Heat Transfer Enhancement By Fluid-induced Vibration Of The Surface Evaporation-type Air Cooler
6.	Study On Energy Conservation Performance Of Circle Holes Fin-Tube Refrigeration Heat Exchanger
7.	Experimental Research On Enhancement Heat Transfer Of Lubricating-oil Cooler And Its Optimization Design
8.	Investigation On Mechanism Of Heat Transfer Intensification Of Solid Particles In Vapor-Liquid-Solid Three-Phase Evaporating Pipe
9.	Experimental Investigation On The Heat Transfer And Resistence Characteristics Of The Sk-tube Refrigeration Heat Exchanger
10.	Investigation On Mechanism Of Heat Transfer Intensification Of Solid Particles In Vapor-liquid-solid Three-phase Evaporating Pipe
11.	Research On Enhancement Of Flat-plate Solar Collector Pipes Heat Convection By Multiple Interlocked Rings Wire Coil Inserts
12.	Numerical Simulation Of Heat Transfer And Structural Characteristics Of Parabolic Trough Receiver With Asymmetric Corrugated Tube
13.	Enhancement Heat Transfer Technology Research On Optimizing By Water-Air Distribution Field In Natural Draft Counter-Flow Wet Cooling Tower
14.	Experimental Study On Heat Enhancement Of Gravity Heat Pipe With Single-line Internal Helical Microfin
15.	The Numerical Simulation And Experimental Research On Heat Transfer Performance Of Tube Fin Heat Exchanger
16.	Optimal Design Of The Heat Transfer Unit Fully Based On The CFD Model
17.	Experimental Study On The Enhancement Of Micro-pillars To The Heat Transfer Performance Of Gravity Heat Pipe With Flat Plate Evaporation Chamber
18.	An Inverse Optimization Of The Heat Transfer In A 2D Channel Flow Based On The Extremum Principle Of Entransy Dissipation
19.	Analysis Of Flow Characteristics And Structural Stress Of Double Spiral Tube Heat Exchanger
20.	Single-phase and two-phase grid-enhancement heat transfer in the reflood stage of a loss of coolant accident
<<First <Prev Next> Last>> Jump to