Font Size: a A A
Keyword [Finite element modeling]
Result: 181 - 200 | Page: 10 of 10
181. Finite Element Modeling Performance Simulation And Experimental Study Of A Dual Mass Flywheel Of A Car
182. Study On Cyclic Constitutive Model Of Stainless-clad Bimetallic Steel And Welded Connection
183. 20' Container Optimized Design
184. Modeling Analysis And Feature Extraction Of The Optical Fiber Temperature/Strain In Submarine Cable With Electrical And Mechanical Faults
185. Structural Condition Diagnosis Of Underpass Railway Tunnel Based On Longitudinal Multi-Section Strain Correlation
186. Construction Optimization Of Shifangyu Tunnel Under Influence Of Surrounding Rock
187. Automatic Modeling And Processing System For Tire Finite Element Analysis
188. Behavior Of Rectangular RACFST Columns Subjected To Eccentric Compression
189. Study On Energy Absorption Characteristics Of Thin-walled Square Tube Of Composite Under Axial Compression Load
190. Research On The Steady Rolling Wear Of Wheel Based On Finite Element Modeling
191. Finite Element Modeling And Stability Analysis Of Bowl Button Full Frame Bracket
192. Seismic Fragility Analysis Of Precast Shear Wall Structure With IDA Methodology
193. Anti-seismic Performance Research Of New Type Foam Concrete Core Wallboard And Infilled Wall Frame
194. Simulation Modeling And Experimental Study Of Pneumatic Hammer Riveting Based On Impact Dynamics
195. The Research On Shaft Pull Performance Of Assembled NC Components With UHPC Wet Joints
196. Study On The Performance Of Small Size Particle And Ultra-thin Overlay Based On Preventive Maintenance
197. Research On The Performance Of Adhesive CFRP Corrugated Plate Under Three Point Bending And Hygrothermal Ageing
198. Research On Finite Element Modeling And Injury Evaluation Of Human Head With Refinement Percentile
199. Axial Compressive Behavior Of CFDST Stub Columns With Large Hollow Ratio
200. Finite Element Modeling And Multi Field Coupling Stress Analysis Of High-Mid Pressure Cylinder-Bolt System Of A Combined Cycle Steam Turbine
  <<First  <Prev  Next>  Last>>  Jump to