Friction characteristic - Globe Thesis

Keyword [Friction characteristic] Result: 1 - 19 \| Page: 1 of 1
1.	Study On Flow Structure And Friction Characteristics Of Near Bottom Layer In Estuarine And Coastal Waters
2.	Research On The Mechanical Seal CAT Device And The Performance Of The GY70 Mechanical Seal
3.	Research On Friction Characteristic Analysis And Friction Compensation Algorithm Of Ball And Plate System
4.	The Research Of Vehicle-used Metallic Material's Dry Friction Characteristic
5.	Reserch On Friction Characteristic Of Kinetic Surface Based On Ultrasonic Vibration
6.	Finite Element Analysis Method Of Long-span Steel Structure Considering Size Effect And Friction Characteristic Of Bearings
7.	Research On The Structure Parameters Influence To Air-Side Heat Transfer And Friction Characteristics Of Parallel Flow Evaporator
8.	Research On Heat Transfer Enhancement And Friction Characteristic Of Lubricating Oil Cooler
9.	The Research And Simulation Of Vehicle Tire/Road Friction Characteristic Transformation Based On The Result Of Skid Resistance Test On The Pavement
10.	Analysis Of Friction Characteristics Of The Sliding Vane And Sliding Chute In The Rolling Piston Compressor Based On LuGre Model
11.	Study On Lubrication Regime Of Space Bearing Lubricated By Lubricating Oil And Rheological Behavior Of Lubricant
12.	The Research On Tire/Road Friction Characteristic Expression Model On Accident Reconstruction
13.	Study On The Characteristics Of Pile Foundation During The Construction Of Viaduct And The Road Under Bridge In Deep Soft Soil Area
14.	Investigation On Friction Characteristics Of The Water-Lubricated Rubber Bearings And The Induced Vibration Of The Propeller Shafting Systems
15.	Numerical Analysis And Experimental Research On Friction Torque Characteristics Of Automobile Ball Joint
16.	The Theoretical Analysis And Experimental Research Of Friction Characteristic Of Hydraulic Reciprocating Seal
17.	Research On Tooth Surface Wear Of Involute Spur Gear And Its Influence On Friction Characteristic
18.	Design And Experimental Study Of Pressure Compensated Hydraulic Reciprocating Seal
19.	Modeling And Friction Characteristics Analysis Of Internal Combustion Constrained Linear Power Generation System
<<First <Prev Next> Last>> Jump to