Injector - Globe Thesis

Keyword [Injector] Result: 181 - 200 \| Page: 10 of 10
181.	Simulation Of Cavitation Flow In Nozzle And Fuel Atomization Of EMD Locomotive Diesel
182.	Design Of Solenoid Valve Of Electronic Controlled Injector For Marine Diesel Engine
183.	The Spray Performanceanalysis Of Diesel Injector Nozzle Based On Corrosion Factors
184.	Measurement&Control System Development Of Solenoid Valve For Electronic-controlled Fuel Injector
185.	Experimental Study Of Flash Boiling Characteristics Of A Gasoline Direct Injection Multi-hole Injector
186.	Numerical Simulation And Experimental Validation Of Internal Nozzle Flow Characteristic Of Injector Under Hot Fuel Conditions
187.	Research And Development Of Off Line Detection System Of Gasoline Engine Fuel Injector
188.	Simulation Of High-pressure Common-rail Fuel Injection System Based On Simulink
189.	Structure Design And Research On Performance Characteristics Of Air Assisted Fuel Injection
190.	Research On The Application Of Domestic Common Rail System To CA4D28Diesel Engine
191.	The Elastic Analysis Of The Fuel Injector Of Engine With Boundary Face Method
192.	Research On Numerical Simulation And Structural Optimization Of Common Rail Injector Response Characteristics
193.	Experimental Study Of Atomization Characteristics Effected By Injector Geometry And Spray Condition On An Internal Mixing Air Atomizing Nozzle
194.	Three Dimensional Numerical Simulation Of Injector
195.	Experimental And Numerical Research On The Flow-field Of The IGCC Low Swirl Combustor
196.	Design Calculations And Simulation Analysis On Locomotive Diesel Injector With The New Longitudinal Way Into Oil
197.	Combined Ejector-absorption Refrigeration Cycle System Of Condensing Pressure Boosted
198.	Life Cycle Assessment Of Fuel Injector Production
199.	Research On The Pressure Fluctuation At The Injector Inlet And Fuel Injection Control
200.	Design Of Piezoelectric Stack Actuator Of Piezoelectric Fuel Injector
<<First <Prev Next> Last>> Jump to