Injector - Globe Thesis

Keyword [Injector] Result: 21 - 40 \| Page: 2 of 10
21.	The Research Of Oil Measurement Automation System Of Injecting Pump Test Bench
22.	Characteristic Research On The Low Pressure Steam Injector Heat-Exchange Device
23.	The Study Of Atomization Character Of Coaxial Injector In Rocket Engine
24.	Finite Element Analysis On 3D Flow In The Nozzle And Shock Stress Of The Needle In Diesel Engine Injector
25.	Exploitation And Research On Gasoline Engine Electronic-controlled Injector Test System
26.	The Simulating Calculation And Structural Design On A Duel-fuel (LPG/diesel) Injector With Mechanically-control And Monomer
27.	Experimental Research On Drag Reduction Of Biomimetic Non-Smooth Of The Surface Of Injector Pinhead
28.	Experimental Investigation Of An Auto-Ignition Igniter With Hydrogen Peroxide
29.	Improvement Of Fuel Measurement System Of Test Bench Of Fuel Injection Pump
30.	Research On The Performance Of Jet Heat Exchanger With Peripheral Steam Entrance
31.	The Design Method Study And Application Of Fuel Supply System For Diesel Engine
32.	The Research For Simulation Of The Common Rail Fuel Injection System On Diesel
33.	The Research In Measure Instrument For Inject Rule Of Diesel Engine Injection System Injector
34.	Analysis Of Fuel Injection System Cavitating Flow And Fuel Characteristics
35.	Study Of A New Short Needle Injector
36.	Simulation Research On Diesel High-pressure Common-rail Fuel Injection System
37.	Numerical Simulation For Effects Of Fuel Injector Parameters On Combustion And Emission Of DI Diesel Engine
38.	The Development Of The Two-stage Spring Injector In 16V280ZJ Type Diesel Engine
39.	The CFD(Computational Fluid Dynamics) Study On Steam Accumulator Injector And Optimization Of Its Structure
40.	Pressure Distribution Analysis And Experiment For NBI Experimental Device Based On Monte-Carlo Method
<<First <Prev Next> Last>> Jump to