Internal Combustion Engines - Globe Thesis

Keyword [Internal Combustion Engines] Result: 21 - 40 \| Page: 2 of 5
21.	The Design Of Fuel Reforming Reactor And Experimental Study On Effect Of Syngas Addition On Performance Of Internal Combustion Engines
22.	Design Of Test Bed To Dynamic Measure The Injection Effect Of Piston Cooling Injector For Internal Combustion Engines
23.	Research On Matching Law Of The Front Cylinder And The Rear Cylinder Of The Engine With Charge Transit Between Different Cylinders
24.	Hydrogen And Liquid Fuels Applications In Dual-fuel Internal Combustion Engines
25.	Development Of MATLAB Simulation Software For The Combustion Processes Of Internal Combustion Engines
26.	Application Of An Advanced RANS Turbulence Model In Modeling In-cylinder Flow Of Internal Combustion Engines
27.	The Fundamental Research On The Heat Transfer Enhancement Of Nanofluids Inside The Piston Cooling Gallery Of Internal Combustion Engines
28.	Study On The Variable Valve Control Strategy Of Low Temperature Combustion In Internal Combustion Engines At Low Loads
29.	Experimental Investigation On The Combustion And Emission Characteristics Of Alcohol-fueled Engine With Hydrogen Addition
30.	Research Of Multiple-Technologies Based Combined Systems Used For Large Temperature Difference Exhaust Waste Heat Recovery Of Diesel Engine
31.	Development And Application Research Of The Combustion And Emission Analysis System In Internal Combustion Engines
32.	Dynamic Modeling And Condition Monitoring Of Sliding Bearings For Internal Combustion Engines
33.	Research On The Lubricant Oil Transportation And Lubrication Between The Piston Assembly And The Cylinder Liner Of Internal Combustion Engines
34.	Investigation Of Waste Heat Recovery System And Expander For Internal Combustion Engines
35.	The Study Of The Detonation Wave Formation And Its Destruction Mechanism In The Closed Space Under Severe Knock In Internal Combustion Engines
36.	Research On In-cylinder Heat Transfer Model For Internal Combustion Engines
37.	Study On Optimization Of Injection Parameters Of Internal Combustion Engines Supplied With Oxygenated Mixing Fuel
38.	Simulation Study On The Effect Of Coolant On Boiling Heat Transfer In The Cooling Water Jacket Of Internal Combustion Engines
39.	A Numerical Study On Split Injection Strategies For Internal Combustion Engines Fueled With Gasoline/Hydrogenated Catalytic Biodiesel Blends
40.	The Research On Basic Characteristics Of Biomass Oil Applied In Internal Combustion Engines
<<First <Prev Next> Last>> Jump to