Ion plating - Globe Thesis

Keyword [Ion plating] Result: 1 - 20 \| Page: 1 of 1
1.	Principle And Development Of Thin Film Thermocouple Sensor For Measuring Dynamic Cutting Temperature Of Chemical Explosive Material
2.	Composite Nitride Hard Coatings Hipib Irradiation
3.	Study On Laser Surface Alloying With Niobium On Uranium And Corrosion Resistance Of Processing Layer
4.	Study Of Developing The Properties Of Gear Transmission Pairs Based On Low Temperature Surface Modification Technologies
5.	Study On The Preparation And Properties Of TiC Thin Films Deposited By The Multi-Arc Techniques
6.	A Study On Optimum Composition And Optimum Plating Progress Of (Ti,Al,Zr)N Super-Hard Reactive Films
7.	Plasma Parameter Diagnosis On Arc Ion Plating By Langmuir Probe
8.	Study On Films Modification On Titanium Bipolar Plates For Regenerative Fuel Cell Deposited By AIP
9.	Preliminary Study For The Calculation Of The Pulsed Bias Arc Ion Plating Deposition Temperature And Nano-multilayer Hard Film
10.	Ion Beam Assisted Vacuum Arc Deposition Of Tin / Cnx Films
11.	Study On Films By Arc Ion Plating On Stainless Steel Bipolar Plates For Proton Exchange Membrane Fuel Cell
12.	Study On Performances Of Films Modification For Three Kinds Of Key Aviation Materials By AIP
13.	Study On Tehnologicai Procedure Of Films By AIP On Stainless Steel Bipolar Plates For Vehicle Fuel Cell
14.	The Workpiece Frame System Of Magnetron Sputtering Ion Plating Machine
15.	Study On The Preparation Of Type K Thin-film Thermocouple By PVD
16.	Research On The Properties Of Cr Coatings Prepared By Three Methods On The Surface Of Gun Barrel Material
17.	Microstructure And High-temperature Oxidation Properties Of NiCoCrAlYSiHf Coating By Arc Ion Plating Under High Current Pulsed Electron Beam
18.	Study On Improvement Of Coating Quality By Introducing Gases Near Cathode Of Arc Ion Plating
19.	Research On Temperature Field Simulation Of Arc Source Internal Cooling System For Vacuum Arc Ion Plating Application
20.	Research On Preparation Process And Corrosion Resistance Of Grounding Conductor Materials Based On Cermet Coating Method
<<First <Prev Next> Last>> Jump to