J-integral - Globe Thesis

Keyword [J-integral] Result: 21 - 40 \| Page: 2 of 3
21.	Study On Mechanical Properties Of The Epoxy Packaging Structure And Its Effect On Performance Of The μDMFC
22.	Study On The Fracture Mechanics Behavior Of Solid Rocket Motor Propellant Containing Defects
23.	Study On The Modelling Of Two-dimensional Numerical Rubber Modified Asphalt Mixture And Simulation On The Virtual Loading Test
24.	Study On The Low Temperature And Fatigue Performance Of Waste Tire Rubber Modified Asphalt Mixture
25.	Numerical Methods Of Concrete Dam Failure Process Based On Fracture Mechanics
26.	Fuel Cells With High Temperature Stability Of The New Type Sealing Glass And Failure Simulation Analysis
27.	The Analysis Of Fracture Behaviour In Interface Structure Of Viscoelastic Material With Temperature Loads
28.	The Initial Crack Formation And Application Research About The Controlled Blasting In Cutting Seam Cartridge
29.	Analysis Of Failure Behavior Of Viscoelastic Material-based Interfacial Structure
30.	Safety Assessment For Defective Welded Structure Of A Nickel-base Alloy Simulant Vessel Of Molten Salt Reactor
31.	The Research On Mechanism Of Cracking Of Asphalt Pavement Under The Coupled Action Of Temperature And Load
32.	Investigation On Ductile Fracture Model Of Ultra-High Toughness Cementitious Composites
33.	Numerical Simulation On The Fatigue Life Of All-steel Radial Tire
34.	A Impact Research On The Autofrettaged Implementation Of Thick-walled Cylinder To Crack Growth
35.	The Theoretical Analysis And Numerical Simulation Of CRTS? Slab Ballastless Track Strengthened With Prestressed Carbon Fiber Reinforced Plastic
36.	Study On The Crack Damage Discipline Of Continuous Rigid Frame Bridge Web Under Seismic Load
37.	Study On The Mechanical Properties Of Corroded Steel Wire's Crack-Tip
38.	Fracture And Crack Propagation Research Of Stiffened Panels
39.	Research On Fracture Analysis And Structural Integrity Evaluation Method For Embedded Crack Structure Under Multiaxial Loading
40.	Studies Of Safety Assessment Methods For Aluminum Alloy Thin-Walled Pressure Vessels With Surface Cracks
<<First <Prev Next> Last>> Jump to